Init-nvram, Get-sw-file, Set-sw-file | Allied Telesis at-8116

System Commands

init-nvram

This command resets the non-volatile RAM (NVRAM) on the SNMP Agent to default values. Change will take effect after boot (warm or cold reset).

get-sw-file

This command retrieves the SNMP Agent Software ﬁle name.

set-sw-file

set-sw-file <filename>

Sets the name of the ﬁle downloaded by TFTP.This name must match the name of the agent software ﬁle on the TFTP server.

get-tftp-srvr

This command retrieves the IP address of the TFTP server which the

Agent will use to download software (see sw-dnld).

set-tftp-srvr

set-tftp-srvr < IP address>

Sets the IP address of the TFTP server used for downloading.

set-tftp-mode

This command sets the TFTP download mode.

SYS_console> set-tftp-mode {clientserver}

Switch Tftp client/server is enabled for next download.

Refer to Appendix A, Software Downloading for more details.

get-tftp-mode

This command retrieves the TFTP download mode and requires no argument.

4-4

Page 24

Image 24

Allied Telesis at-8116 Init-nvram, Get-sw-file, Set-sw-file, Get-tftp-srvr, Set-tftp-srvr, Set-tftp-mode, Get-tftp-mode

Contents

E R ’ S G U I D E Page Table of Contents Appendix B Administrative Interface Rmon Administrative Interface Accessing the Snmp Agent Network Management SystemsSystem Requirements VT100 Terminal Settings Software Requirements Testing the Installation Accessing the Command Line Interface RemotelyPage Command Line Interface Features of the Command Line Interface Entering Commands SYSconsole pin Command pin not foundGet-comm read write Get-comm read Get-comm write SYSconsole ping 129.1.1.7 ? ping IP traffic generator System Commands System CommandsSYSconsolesystem Command Line Interface Structure SYSconsoleget-c? Command get-c not found2Commands Matching get-c Commands Groups SYSconsole? Console Commands Help-kbdSYSconsolehelp-kbd Console Function Keys Login BannerClear Logout Set-attr-prompt Set-attr-msgSet-attr-text Set-passwd Console Commands System Commands Sys-stat System Commands SYSconsole Warm-reset Cold-resetGet-stst-level Set-stst-level level Init-nvram Get-sw-fileSet-sw-file Get-tftp-srvr Sw-dnld Set-fg-paramStart-fg Stop-fg IP Commands Get-ipSet-ip Set-ipIPaddress If no IP Config. is defined Get-ip-cfgSet-ip-cfg Set-ip-cfg IPaddress netmask broadcast Clear-ip-cfg SYSconsoleget-gatew Default gateway address is Get-gatewSet-gatew Set-gatew IPaddress Address Resolution Commands Get-arp-tblDel-arp-entry SYSconsoleget-arp-tbl IfIndex IpAddress Add-arp-entry 194.090.136.126 Ping Commands PingPing-stop SYSconsoleping 194.90.136.23 SYSconsoleping 194.90.136.20 Echo RequestsEcho Responses Ping process press CR for prompt SYSconsole Echo responses Ping process press Ping-stop Stop the active ping ProcessPage Snmp Commands Snmp Community String CommandsGet-comm Get-comm readwrite Snmp Trap Message Commands Set-commGet-auth Set-auth Get-traps Add-trap Del-trap Get-rmon-stateSYSconsoledel-trap SYSconsoleget-rmon-state Switching Database Commands Lock Learning Table Get-lt-entry Get-lt-16 SYStelnetget-lt-16 Find-lt-addr SYStelnetﬁnd-lt-addr 0060e8112265 Del-lt-entry SYSconsolefind-lt-addrMAC Address 01-02-03-04-05-06 not in LT Del-lt-entry index Del-lt-addr Add-lt-entryGet-lt-age SYSconsoledel-lt-entry Set-lt-age Set-lt-age runnvramall agingtimeSYSconsoleset-lt-age all Page Virtual LAN Commands Type vlan to view the related commands SYSconsolevlan Virtual Broadcast Domains VBC Get-con-matrix SYSconsoleget-con-matrix ========================== Del-vbc-domain Set-vbc-domain Set-vbc-domain runnvramall portlistSet-vbc-domain all Del-vbc-domain runnvram domainid Get-vbc-matrix SYSconsoleget-vbc-matrix Security VLANs Set-sec-vlanSvlan Groups Del-sec-vlan LANs 0 0 0 0 0 0 0 1 1 1 1 1 13 4 5 6 7 8 9 0 1 Del-sec-vlan runnvram lanid Get-svlan-tbl Get-svlan-tbl runnvramSYSconsoleget-svlan-tbl run + + + + + + + + SYSconsole Get-svlan-matrix Get-svlan-matrix runnvram SYSconsoleget-svlan-matrix runPage Port Monitoring Commands Set-mon-portStop-mon Get-nv-mon Save-mon Clear-nv-mon Port Conﬁguration Commands Get-port-cfgSYSconsoleget-port-cfg Set-port-dplex Set-port-dplex portnumber halffullSYSconsoleset-port-dplex 2 full Set-speed-sel Set-port-stateSet-aggr-mode SYSconsoleset-aggr-modePage Switching Statistics Commands Clr-cntGet-eth-cnt Switching Statistics Commands Get-colls-cnt Get-rmon-cntGet-sdist-cnt SYSconsoleget-colls-cnt Get-mgm-brcnt =============================================15637 1123754 Spanning Tree Commands Set-stp enabledisableGet-stp Set-stp Get-st-bcfg Get-st-pcfgGet-st-syscfg Set-br-prio Set-prt-prio Set-prt-enbSet-prt-pcost Page Using an Snmp Manager Configuring the AT-8116 Snmp Agent SYSconsoleset-gatew Read public New read communityPage Software Troubleshooting Page Tftp Client Download Procedure Software DownloadingRequirements Tftp Server Download Procedure System Defaults System Default ValuesPage Command Line Reference Table C-1 Console Commands Table C-2 System Commands Table C-3IP Commands Table C-4SNMP Commands Table C-5 Switching Database Commands Table C-6 Virtual LAN Commands Table C-7Port Conﬁguration Commands Table C-8Switching Statistics CommandsTable C-9Spanning Tree Commands

Allied Telesis at-8116 manual Init-nvram, Get-sw-file, Set-sw-file, Get-tftp-srvr, Set-tftp-srvr

Models: at-8116