Switching Database Commands, Lock | Allied Telesis at-8116 instruction

Chapter 9

Switching Database Commands

This section contains instructions for managing the Switching Database with the Administrative Interface.Type <switch-db>to view related commands.

The Switching Database consists of 8192 entries. Each active entry contains the information relevant to a workstation, characterized by its Ethernet MAC Address. Each entry contains the following information:

❑Entry

Signifies the index in the Switching Database Table.

❑LOCK

If on (denoted as a +), the entry will not be deleted by the switch aging process (static entry). If off (denoted as a -), this is a dynamic entry that may be automatically deleted by the switch aging process if a packet with this source MAC address is not received during an aging time period.

❑MGMT (not user configurable)

If on (denoted as a +), the entry is a system address. Such addresses are the switch’s individual and group addresses, as well as other addresses added by the management system. If off (denoted as a -), the entry contains the MAC address of a station on the connected network.

❑DPORT

The destination port to which frames with the stated address will be forwarded.

9-1

Image 41

Allied Telesis at-8116 manual Switching Database Commands, Lock

Contents

E R ’ S G U I D E Page Table of Contents Appendix B Rmon Administrative Interface Administrative Interface System Requirements Accessing the Snmp AgentNetwork Management Systems Software Requirements VT100 Terminal Settings Accessing the Command Line Interface Remotely Testing the InstallationPage Features of the Command Line Interface Command Line Interface SYSconsole pin Command pin not found Entering CommandsGet-comm read write Get-comm read Get-comm write SYSconsole ping 129.1.1.7 ? ping IP traffic generator SYSconsolesystem System CommandsSystem Commands 2Commands Matching get-c Command Line Interface StructureSYSconsoleget-c? Command get-c not found SYSconsole? Commands Groups Help-kbd Console CommandsSYSconsolehelp-kbd Console Function Keys Banner LoginClear Logout Set-attr-msg Set-attr-promptSet-attr-text Set-passwd Console Commands Sys-stat System Commands SYSconsole System Commands Cold-reset Warm-resetGet-stst-level Set-stst-level level Get-sw-file Init-nvramSet-sw-file Get-tftp-srvr Start-fg Sw-dnldSet-fg-param Stop-fg Get-ip IP CommandsSet-ip Set-ipIPaddress Get-ip-cfg If no IP Config. is definedSet-ip-cfg Set-ip-cfg IPaddress netmask broadcast Clear-ip-cfg Get-gatew SYSconsoleget-gatew Default gateway address isSet-gatew Set-gatew IPaddress Get-arp-tbl Address Resolution CommandsDel-arp-entry SYSconsoleget-arp-tbl IfIndex IpAddress 194.090.136.126 Add-arp-entry Ping Ping CommandsPing-stop SYSconsoleping 194.90.136.23 Echo Responses Ping process press CR for prompt SYSconsole SYSconsoleping 194.90.136.20Echo Requests Ping-stop Stop the active ping Process Echo responses Ping process pressPage Snmp Community String Commands Snmp CommandsGet-comm Get-comm readwrite Set-comm Snmp Trap Message CommandsGet-auth Set-auth Add-trap Get-traps Get-rmon-state Del-trapSYSconsoledel-trap SYSconsoleget-rmon-state Lock Switching Database Commands Get-lt-entry Learning Table SYStelnetget-lt-16 Get-lt-16 SYStelnetﬁnd-lt-addr 0060e8112265 Find-lt-addr SYSconsolefind-lt-addr Del-lt-entryMAC Address 01-02-03-04-05-06 not in LT Del-lt-entry index Add-lt-entry Del-lt-addrGet-lt-age SYSconsoledel-lt-entry SYSconsoleset-lt-age all Set-lt-ageSet-lt-age runnvramall agingtime Page Type vlan to view the related commands SYSconsolevlan Virtual LAN Commands Get-con-matrix Virtual Broadcast Domains VBC ========================== SYSconsoleget-con-matrix Set-vbc-domain Set-vbc-domain runnvramall portlist Del-vbc-domainSet-vbc-domain all Del-vbc-domain runnvram domainid SYSconsoleget-vbc-matrix Get-vbc-matrix Svlan Groups Security VLANsSet-sec-vlan LANs 0 0 0 0 0 0 0 1 1 1 1 1 1 Del-sec-vlan3 4 5 6 7 8 9 0 1 Del-sec-vlan runnvram lanid Get-svlan-tbl runnvram Get-svlan-tblSYSconsoleget-svlan-tbl run + + + + + + + + SYSconsole Get-svlan-matrix runnvram SYSconsoleget-svlan-matrix run Get-svlan-matrixPage Set-mon-port Port Monitoring CommandsStop-mon Get-nv-mon Clear-nv-mon Save-mon SYSconsoleget-port-cfg Port Conﬁguration CommandsGet-port-cfg SYSconsoleset-port-dplex 2 full Set-port-dplexSet-port-dplex portnumber halffull Set-port-state Set-speed-selSet-aggr-mode SYSconsoleset-aggr-modePage Get-eth-cnt Switching Statistics CommandsClr-cnt Switching Statistics Commands Get-rmon-cnt Get-colls-cntGet-sdist-cnt SYSconsoleget-colls-cnt 15637 1123754 Get-mgm-brcnt============================================= Set-stp enabledisable Spanning Tree CommandsGet-stp Set-stp Get-st-pcfg Get-st-bcfgGet-st-syscfg Set-br-prio Set-prt-pcost Set-prt-prioSet-prt-enb Page Configuring the AT-8116 Snmp Agent Using an Snmp Manager SYSconsoleset-gatew New read community Read publicPage Software Troubleshooting Page Requirements Tftp Client Download ProcedureSoftware Downloading Tftp Server Download Procedure System Default Values System DefaultsPage Table C-1 Console Commands Command Line Reference Table C-2 System Commands Table C-4SNMP Commands Table C-3IP Commands Table C-6 Virtual LAN Commands Table C-5 Switching Database Commands Table C-9Spanning Tree Commands Table C-7Port Conﬁguration CommandsTable C-8Switching Statistics Commands