Get-ip-cfg, Set-ip-cfg | Allied Telesis at-8116 specs

IP Commands

Sets the IP address of the SNMP Agent. If no IP address was previously set (as is the default factory conﬁguration), the new value will be used immediately and saved into NVRAM. Otherwise the new value will only be stored in the NVRAM, and the user must execute a “warm-reset” to effect the change.

get-ip-cfg

This shows the complete current IP conﬁguration - address, network mask and broadcast address.

--If an address has been previously defined: SYS_console> get-ip-cfg

The device IP address, netmask and broadcast are:

IP address : 149.035.200.032

IP netmask : 255.255.255.000

IP broadcast : 149.035.200.255

--If no address is defined: SYS_console> get-ip-cfg

The device has no IP Address deﬁned.

SYS_console>

set-ip-cfg

set-ip-cfg <IPaddress> <netmask> <broadcast>

Sets IP address, network IP address and broadcast IP address. If no IP conﬁguration was previously set (as is the default factory conﬁguration), the new values will be used immediately and saved into NVRAM. If a previous IP conﬁguration was being used, the new conﬁguration will be saved in NVRAM for the next session. In order to use the newly deﬁned values immediately, reset the system using the “warm-reset” command.

Note

If the IP configuration is not specified, the agent will not respond to any in-band requests, including ping messages.

-- If no IP Config. is defined:

5-2

Image 28

Allied Telesis at-8116 manual Get-ip-cfg, Set-ip-cfg IPaddress netmask broadcast, If no IP Config. is defined

Contents

E R ’ S G U I D E Page Table of Contents Appendix B Administrative Interface Rmon Administrative Interface Network Management Systems Accessing the Snmp AgentSystem Requirements VT100 Terminal Settings Software Requirements Testing the Installation Accessing the Command Line Interface RemotelyPage Command Line Interface Features of the Command Line Interface Entering Commands SYSconsole pin Command pin not foundGet-comm read write Get-comm read Get-comm write SYSconsole ping 129.1.1.7 ? ping IP traffic generator System Commands System CommandsSYSconsolesystem SYSconsoleget-c? Command get-c not found Command Line Interface Structure2Commands Matching get-c Commands Groups SYSconsole? Console Commands Help-kbdSYSconsolehelp-kbd Console Function Keys Login BannerClear Logout Set-attr-prompt Set-attr-msgSet-attr-text Set-passwd Console Commands System Commands Sys-stat System Commands SYSconsole Warm-reset Cold-resetGet-stst-level Set-stst-level level Init-nvram Get-sw-fileSet-sw-file Get-tftp-srvr Set-fg-param Sw-dnldStart-fg Stop-fg IP Commands Get-ipSet-ip Set-ipIPaddress If no IP Config. is defined Get-ip-cfgSet-ip-cfg Set-ip-cfg IPaddress netmask broadcast Clear-ip-cfg SYSconsoleget-gatew Default gateway address is Get-gatewSet-gatew Set-gatew IPaddress Address Resolution Commands Get-arp-tblDel-arp-entry SYSconsoleget-arp-tbl IfIndex IpAddress Add-arp-entry 194.090.136.126 Ping Commands PingPing-stop SYSconsoleping 194.90.136.23 Echo Requests SYSconsoleping 194.90.136.20Echo Responses Ping process press CR for prompt SYSconsole Echo responses Ping process press Ping-stop Stop the active ping ProcessPage Snmp Commands Snmp Community String CommandsGet-comm Get-comm readwrite Snmp Trap Message Commands Set-commGet-auth Set-auth Get-traps Add-trap Del-trap Get-rmon-stateSYSconsoledel-trap SYSconsoleget-rmon-state Switching Database Commands Lock Learning Table Get-lt-entry Get-lt-16 SYStelnetget-lt-16 Find-lt-addr SYStelnetﬁnd-lt-addr 0060e8112265 Del-lt-entry SYSconsolefind-lt-addrMAC Address 01-02-03-04-05-06 not in LT Del-lt-entry index Del-lt-addr Add-lt-entryGet-lt-age SYSconsoledel-lt-entry Set-lt-age runnvramall agingtime Set-lt-ageSYSconsoleset-lt-age all Page Virtual LAN Commands Type vlan to view the related commands SYSconsolevlan Virtual Broadcast Domains VBC Get-con-matrix SYSconsoleget-con-matrix ========================== Del-vbc-domain Set-vbc-domain Set-vbc-domain runnvramall portlistSet-vbc-domain all Del-vbc-domain runnvram domainid Get-vbc-matrix SYSconsoleget-vbc-matrix Set-sec-vlan Security VLANsSvlan Groups Del-sec-vlan LANs 0 0 0 0 0 0 0 1 1 1 1 1 13 4 5 6 7 8 9 0 1 Del-sec-vlan runnvram lanid Get-svlan-tbl Get-svlan-tbl runnvramSYSconsoleget-svlan-tbl run + + + + + + + + SYSconsole Get-svlan-matrix Get-svlan-matrix runnvram SYSconsoleget-svlan-matrix runPage Port Monitoring Commands Set-mon-portStop-mon Get-nv-mon Save-mon Clear-nv-mon Get-port-cfg Port Conﬁguration CommandsSYSconsoleget-port-cfg Set-port-dplex portnumber halffull Set-port-dplexSYSconsoleset-port-dplex 2 full Set-speed-sel Set-port-stateSet-aggr-mode SYSconsoleset-aggr-modePage Clr-cnt Switching Statistics CommandsGet-eth-cnt Switching Statistics Commands Get-colls-cnt Get-rmon-cntGet-sdist-cnt SYSconsoleget-colls-cnt ============================================= Get-mgm-brcnt15637 1123754 Spanning Tree Commands Set-stp enabledisableGet-stp Set-stp Get-st-bcfg Get-st-pcfgGet-st-syscfg Set-br-prio Set-prt-enb Set-prt-prioSet-prt-pcost Page Using an Snmp Manager Configuring the AT-8116 Snmp Agent SYSconsoleset-gatew Read public New read communityPage Software Troubleshooting Page Software Downloading Tftp Client Download ProcedureRequirements Tftp Server Download Procedure System Defaults System Default ValuesPage Command Line Reference Table C-1 Console Commands Table C-2 System Commands Table C-3IP Commands Table C-4SNMP Commands Table C-5 Switching Database Commands Table C-6 Virtual LAN Commands Table C-8Switching Statistics Commands Table C-7Port Conﬁguration CommandsTable C-9Spanning Tree Commands