Miller Electric and SS-74D16, SS-74D12, SS-74S12, SS-74S16 SECTION 3 INTRODUCTION, SECTION 4 INSTALLATION

OM-1500−11 Page 9
SECTION 3 − INTRODUCTION
3-1. Specifications
Type of Input
Power Welding Power Source Type Wire Feed Speed Range Wire Diameter Range Welding Circuit Rating Weight
24 Volts AC
Single-Phase
10 Amperes
50/60 Hertz
Constant Voltage (CV)
DC With 14-Pin And
Contactor Control
Standard: 50 To 780 ipm
(1.3 To 19.8 mpm)
Optional High Speed: 92
To 1435 ipm (2.3 To 36.4
mpm)
.023 To 1/8 in (0.6
To 3.2 mm)
Max Spool Weight:
60 lb (27 kg)
100 Volts,
750 Amperes, 100%
Duty Cycle
12 ft (3.7 m):
160 lb (73 kg)
16 ft (4.9 m):
210 lb (95 kg)
12 ft (3.7 m) Boom 16 ft (4.9 m) Boom
Maximum Height With 4 ft (1.2 m) Post 17 ft (5.2 m) 21 ft (6.4 m)
Vertical Lift Of Boom Horizontal to 60° Above Horizontal Horizontal to 60° Above Horizontal
SECTION 4 − INSTALLATION
4-1. Installing Swivel Into Pipe Post
ST-152 268-B
1 Swingpak Base or CBC Cart
2 Pipe Post With Base
3 Steel Bolt
Secure as shown using as a mini-
mum 1/2 in diameter SAE grade 5
steel bolts.
4 Swivel Assembly
Insert into pipe post. Lubricate
swivel.
5 Safety Collar
YDo not remove until
instructed to.
1
23
4
5
3/4 in
Tools Needed: