Cisco Systems 15216 EDFA2 manual Rtrv-Ne-Gen, CommandRTRV-NE-GEN, RTRV-INV Syntax Description

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-43 RTRV-INV Syntax Description

Parameter	Syntax	Description
date	yyyy-mm-dd	Date of origination of TL1 message.
time	hh:mm:ss	Time of origination of TL1 message.
aid		EQPT and ALL have same input effect.
	EQPT	General parameters of the ONS 15216 EDFA2 (not directly
		affecting optical signal or power bus).
	ALL	Any or all of the preceding (command input only).
cleicode	string	CLEI code (cerent15216EdfaCLEI).
descr	string	System description (cerent15216EdfaPhysicalDescr).
fwrev	string	Firmware revision number
		(cerent15216EdfaPhysicalFirmwareRev).
hwrev	string	Hardware revision number
		(cerent15216EdfaPhysicalHardwareRev).
mfg	string	Manufacturer name (cerent15216EdfaPhysicalMfgName).
model	string	Model name (cerent15216EdfaPhysicalModelName).
name	string	System’s sid/tid name (sysName).
serialnum	string	System serial number (cerent15216EdfaPhysicalSerialNum).
swrev	string	Software revision number
		(cerent15216EdfaPhysicalSoftwareRev).

9.7.37 RTRV-NE-GEN

CommandRTRV-NE-GEN

Retrieves general parameters of the ONS 15216 EDFA2. Retrieves sid/tid name, IP address and mask, and default router information. Also retrieves the boot table content.

SyntaxRTRV-NE-GEN:[<tid>]::<ctag>; <sid> <date> <time>

M<ctag> COMPLD "<aid>:NAME=<name>,IPADDR=<ipaddr>,IPMASK=<ipmask>,DEFRTR=<defrtr>,

BOOTRECORDTYPE1=<bootrectype1>, BOOTFILENAME1=<bootfilename1>,BOOTIPADDR1=<bootipaddr1>,

BOOTRECORDTYPE2=<bootrectype2>,BOOTFILENAME2=<bootfilename2>,

BOOTIPADDR2=<bootipaddr2>,CLI=<cli>"

;

Cisco ONS 15216 EDFA2 Operations Guide

9-52 78-16033-01