Cisco Systems 15216 EDFA2 manual Ctmp

Chapter 9 TL1 Commands

		TL1 Commands and Autonomous Messages
F I N A L D R A F T - C I S C O C O N F I D E N T I A L
Table 9-33 RTRV-ALM-EQPT Syntax Description (continued)
Parameter	Syntax	Description
condtype		Condition type identifies the type of alarm (maps to
		cerent15216EdfaLogEventID). Possible condtype and
		corresponding conddescr (in quotes) are:
	CTMP	“Case Temperature Out of Range” alarm
		(cerent15216EdfaAlarmCtmp).
	LCRNT1	“Excessive Pump1 Current” alarm
		(cerent15216EdfaAlarmLcrnt1).
	LCRNT2	“Excessive Pump2 Current” alarm
		(cerent15216EdfaAlarmLcrnt2).
	LTMP1	“Excessive Pump1 Temperature” alarm
		(cerent15216EdfaAlarmLtmp1).
	LTMP2	“Excessive Pump2 Temperature” alarm
		(cerent15216EdfaAlarmLtmp2).
date	yyyy-mm-dd	Date of origination of TL1 message.
ntfncde		Notification code (maps to cerent15216EdfaAlarmPriority).
		Possible values are:
	CR	Critical alarm.
	MJ	Major alarm.
	MN	Minor alarm.
	CL	Cleared alarm.
	NA	No alarm.
ocrdat	m-d	Date (month-day) of the event occurrence (derived from
		cerent15216EdfaDateAndTimeString).
ocrtm	h-m-s	Time (hour-minute-second) of the event occurrence (derived
		from cerent15216EdfaDateAndTimeString).
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
srveff		Effect on service. Possible values are:
	SA	Service affecting.
	NSA	Non-service affecting.
time	hh:mm:ss	Time of origination of TL1 message.

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-39