Cisco Systems 15216 EDFA2 manual Rtrv-Cond-Env, CommandRTRV-COND-ENV

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-36 RTRV-COND-DWDM Syntax Description (continued)

Parameter	Syntax	Description
ntfncde		Notification code (maps to cerent15216EdfaAlarmPriority).
		Possible values are:
	CR	Critical alarm.
	MJ	Major alarm.
	MN	Minor alarm.
	NA	No alarm.
ocrdat	m-d	Date (month-day) of the event occurrence (derived from
		cerent15216EdfaDateAndTimeString).
ocrtm	h-m-s	Time (hour-minute-second) of the event occurrence (derived
		from cerent15216EdfaDateAndTimeString).
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
srveff		Effect on service. Possible values are:
	SA	Service affecting.
	NSA	Non-service affecting.
time	hh:mm:ss	Time of origination of TL1 message.

9.7.30 RTRV-COND-ENV

CommandRTRV-COND-ENV

Generates a report on the condition (state) of environmental (power bus) alarms.

SyntaxRTRV-COND-ENV:[<tid>]:<aid>:<ctag>::[<condtype>][,,]; <sid> <date> <time>

M <ctag> COMPLD

"<aid>,<ccm>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,,<conddescr>"

;

Example 9-32 RTRV-COND-ENV Command and Response

Amp01:ONS15216 EDFA2> RTRV-COND-ENV:Amp01:ALL:229::PWRBUSA;

Amp01 2002-06-20 14:30:00

M229 COMPLD "PWR-A,ENV:MN,PWRBUSA,NSA,6-20,14-25-30,,,\"Power Bus A Alarm\""

;

Cisco ONS 15216 EDFA2 Operations Guide

9-44 78-16033-01