Cisco Systems 15216 EDFA2 manual Rtrv-Cond-Dwdm, CommandRTRV-COND-DWDM

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

9.7.29 RTRV-COND-DWDM

CommandRTRV-COND-DWDM

Generates a report on the condition (state) of DWDM alarms.

Note The messages for Loss of Signal (LOS), Gain Out of Range (GAIN), and Loss of Output Power (LPOUT) are prioritized (in the order just listed) so that only one message can be delivered at one time. For example, if the ONS 15216 EDFA2 detects both a loss of input signal and a loss of output power at the same time, it will deliver only the Loss of Signal (LOS) message to the user. This prioritized filtering of alarms does not occur with the SNMP delivery of alarms of the ONS 15216 EDFA2.

SyntaxRTRV-COND-DWDM:[<tid>]:<aid>:<ctag>::[<condtype>][,,,];

<sid> <date> <time>

M<ctag> COMPLD "<aid>,<ccm>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,,<conddescr>"

;

Example 9-31 RTRV-COND-DWDM Command and Response

Amp01:ONS15216 EDFA2> RTRV-COND-DWDM:Amp01:ALL:229::LOS;

Amp01 2002-06-20 14:30:00

M229 COMPLD "1,DWDM:MJ,LOS,SA,6-20,14-25-30,,,\"Loss Of Signal\""

;

Table 9-36 RTRV-COND-DWDM Syntax Description

Parameter	Syntax	Description
aid		1 and ALL have same input effect.
	1	Directly affecting the optical signal.
	ALL	Any or all of the preceding (command input only).
conddescr		Detailed text description of the event. The conddescr is 1 to 64
		characters of ASCII text. See condtype below.
condtype		Condition type identifies the type of alarm (maps to
		cerent15216EdfaLogEventID). Possible condtype and
		corresponding conddescr (in quotes) are:
	LOS	“Loss of Signal” (input power) alarm
		(cerent15216EdfaAlarmLpin).
	GAIN	“Gain Out of Range” alarm (cerent15216EdfaAlarmGain).
	LPOUT	“Loss of Output Power” alarm (cerent15216EdfaAlarmLpout).
date	yyyy-mm-dd	Date of origination of TL1 message.

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-43