Cisco Systems 15216 EDFA2 manual All, RTRV-ALM-DWDM Syntax Description

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

"1,DWDM:MJ,LOS,SA,6-20,14-25-30,,:\"Loss Of Signal\""

;

Table 9-31 RTRV-ALM-DWDM Syntax Description

Parameter	Syntax	Description
aid		1 and ALL have same input effect.
	1	Directly affecting the optical signal.
	ALL	Any or all of the preceding (command input only).
conddescr		Detailed text description of the event. The conddescr is 1 to
		64 characters of ASCII text. See condtype below.
condtype		Condition type identifies the type of alarm (maps to
		cerent15216EdfaLogEventID). Possible condtype and
		corresponding conddescr (in quotes) are:
	LOS	“Loss of Signal” (input power) alarm
		(cerent15216EdfaAlarmLpin).
	GAIN	“Gain Out of Range” alarm (cerent15216EdfaAlarmGain).
	LPOUT	“Loss of Output Power” alarm
		(cerent15216EdfaAlarmLpout).
date	yyyy-mm-dd	Date of origination of TL1 message.
ntfncde		Notification code (maps to cerent15216EdfaAlarmPriority).
		Possible values are:
	CR	Critical alarm.
	MJ	Major alarm.
	MN	Minor alarm.
	CL	Cleared alarm.
	NA	No alarm.
ocrdat	m-d	Date (month-day) of the event occurrence (derived from
		cerent15216EdfaDateAndTimeString).
ocrtm	h-m-s	Time (hour-minute-second) of the event occurrence (derived
		from cerent15216EdfaDateAndTimeString).
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
srveff		Effect on service. Possible values are:
	SA	Service affecting.
	NSA	Non-service affecting.
time	hh:mm:ss	Time of origination of TL1 message.

Cisco ONS 15216 EDFA2 Operations Guide

9-36 78-16033-01