Cisco Systems 15216 EDFA2 manual OpGroup Table, cerent15216EdfaOpGroup Variable Descriptions

Chapter 5 SNMP MIB Installation and Configuration

Tables and Groups

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 5-11 cerent15216EdfaAlarmEntry Variable Descriptions (continued)

		Maximum
Variable	Syntax	Access	Description
cerent15216EdfaAlarmEnable	cerent15216EdfaControl	Read-write	If the alarm is
Status			enabled/disabled.
cerent15216EdfaAlarmDateAn	cerent15216EdfaDateAndTime	Read-only	The local date and time
dTime	String		when the alarm entered
			its current state.

5.4.7 OpGroup Table

The cerent15216EdfaOpGroup table is used to display or set operation actions, such as saving configuration or loading new software. The individual variables in Table 5-12are generally used instead of the table command. That is, when performing a cutover command, the user would use the snmp attribute set local cerent15216EdfaOpCutover perform command.

Table 5-12 cerent15216EdfaOpGroup Variable Descriptions

				Maximum
		Variable	Syntax	Access	Description
		cerent15216EdfaOpStatus	cerent15216EdfaActio	Read-only	The status of the current
			nStatus		operation.
		cerent15216EdfaOpResult	Integer	Read-only	This value is used to save the error
					result (if any) of the last
					operation. Success is indicated by
					a value of 0.
		cerent15216EdfaOpRequest	Integer	Read-write	The request identifier for this
		Id			operation. This is provided to
					allow managers to match actions
					and results.
		cerent15216EdfaOpSaveCo	cerent15216EdfaActio	Read-write	To save the configuration of the
		nfig	n		optical module, write “perform”
					to this object.
		cerent15216EdfaOpCutover	cerent15216EdfaActio	Read-write	When “perform” is written to this
			n		object, firmware is executed from
					the current plane and the alternate
					plane status is changed to the
					default active plane.
		cerent15216EdfaOpLoad	cerent15216EdfaActio	Read-write	When “perform” is written to this
			n		object, new firmware is
					downloaded. Before setting this
					attribute, the source of the new
					firmware should be specified by
					setting
					cerent15216EdfaOpSrcFileName
					and
					cerent15216EdfaOpTftpSrvAddr.
	Cisco ONS 15216 EDFA2 Operations Guide
5-20					78-16033-01