Denon AVR-2802/982 operating instructions English, Setting the digital in assignment

Models: AVR-2802/982

1 73
Download 73 pages 34.36 Kb
Page 24
Image 24
Setting the digital in assignment

ENGLISH

Manual backgroundManual background When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect ALL surround modes. Consider this mode a Master Channel Level adjustment mode.

Manual backgroundManual background After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within each surround mode on Page 42.

Manual backgroundManual background You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, 5CH/6CH STEREO, DOLBY/DTS SURROUND, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE, and MATRIX.

Setting the digital in assignment

This setting assigns the digital input jacks of the AVR-2802/982 for the different input sources.

1

At the System Setup Menu select “Digital In Assignment”.

 

2

Switch to the Digital In Assignment screen.

 

 

ENTER

3

Select the digital input jack to be assigned to the input source.

• To select the input source

 

To select the digital input jack

Select “OFF” for input sources for which no digital input jacks are used.

Manual backgroundManual background If “Yes” is selected for “Default”, the settings are automatically reset to the default values.

4

 

Enter the setting.

 

 

 

ENTER

The System Setup Menu reappears.

 

 

NOTES:

The OPTICAL 3 jacks on the AVR-2802/982’s rear panel are equipped with an optical digital output jack for recording digital signals on a CD recorder, MD recorder or other digital recorder. Use this for digital recording between a digital audio source (stereo - 2 channel) and a digital audio recorder.

Do not connect the output of the component connected to the OPTICAL 3 OUT jack on the AVR-2802/982’s rear panel to any jack other than the OPTICAL 3 IN jack.

“PHONO” and “TUNER” cannot be selected on the Digital In Assignment screen.

24

Page 24
Image 24
Denon AVR-2802/982 operating instructions English, Setting the digital in assignment