Denon AVR-2802/982 operating instructions Englis, Example Stereo

ENGLIS

Select the play mode.

3 Press the SURROUND MODE button, then turn the SELECT knob.

Example: Stereo

SURROUND	SELECT
MODE	STEREO

(Main unit) (Remote control unit)

To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode button then operate the selector.

SURROUND

MODE

		(Main unit)
4	Start playback on the selected component.
	• For operating instructions, refer to the component’s
	manual.
5	Adjust the volume.	MASTER VOLUME
			MASTER VOL.
	The volume level is	(Main unit)	(Remote control unit)
	displayed on the master
	volume level display.

The volume can be adjusted within the range of –70 to 0 to 18 dB,

Input mode display

•In the AUTO mode

INPUT

AUTO PCMDTS

•In the DIGITAL PCM mode

INPUT

AUTO PCMDTS

•In the DIGITAL DTS mode

INPUT

AUTO PCMDTS

•In the ANALOG mode

INPUT

AUTO PCMDTS

Input signal display

•DOLBY DIGITAL

SIGNAL

DIGITAL

•DTS

SIGNAL

DIGITAL

•PCM

SIGNAL

DIGITAL

One of these lights, depending on the input signal.

DIGITAL ANALOG

DIGITAL

DIGITAL

ANALOG

in steps of 1 dB. However, when the channel level is set as described on page 22 or pages 42 and 43, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB. (In this case the maximum volume adjustment range is “18 dB — (Maximum value of channel level)”.)

Input mode when playing DTS sources

•Noise will be output if DTS-compatible CDs or LDs are played in the “ANALOG” or “PCM” mode.

When playing DTS-compatible sources, be sure to connect the source component to the digital input jacks (OPTICAL/COAXIAL) and set the input mode to “DTS”.

The DIGITAL indicator lights when digital signals are being input properly. If the DIGITAL indicator does not light, check whether the digital input component setup (page 24) and connections are correct and whether the component’s power is turned on.

NOTE:

•The DIGITAL indicator will light when playing CD-ROMs containing data other than audio signals, but no sound will be heard.

37