Denon AVR-2802/982 operating instructions Englis, Select the mode

Models: AVR-2802/982

1 73
Download 73 pages 34.36 Kb
Page 23
Image 23
Select the mode.

ENGLIS

4

Select the mode.

Select “Auto” or “Manual”.

 

 

Auto:

 

 

Adjust the level while listening to the test tones produced automatically

 

 

from the different speakers.

 

Manual:

 

 

Select the speaker from which you want to produce the test tone to

 

 

adjust the level.

Example: When the “Auto” mode is selected

5

6

7

Select “Test Tone Start”.

Select “Yes”.

a. If the “Auto” mode is selected:

Test tones are automatically emitted from the different speakers.

The test tones are emitted from the different speakers in the following order, at 4-second intervals the first time and second time around, 2- second intervals the third time around and on:

 

 

 

 

SBR

SBL

 

FL

C

FR

SR

SB

SL

SW

 

 

 

 

 

 

Flashing

Use the CURSOR buttons to adjust all the speakers to the same

Example: When the volume is set to –12 dB

volume.

 

 

 

 

while the test tone is being

 

 

 

 

produced from the subwoofer

The volume can be adjusted between –12 dB and +12 dB in units of 1 dB.

 

 

 

 

 

 

 

 

 

When the surround back speaker setting is set to “2spkrs” for

 

 

 

 

 

 

 

 

 

“Speaker Configuration”, this is set to “SBR”, “SBL”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

b. When the “Manual” mode is selected

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the

and

cursor buttons to select the speaker from which you

 

 

 

 

 

 

 

 

 

want to produce the test tone, then use the

and

cursor buttons

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to adjust so that the volume from the different speakers sounds the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

same.

 

 

 

Flashing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Example: When the volume is set to –12 dB

 

 

 

 

 

while the subwoofer is selected

8

 

After the above settings are completed, press the ENTER button.

 

 

 

ENTER

The “Channel Level” screen reappears.

 

 

Press the ENTER button again, the “System Setup Menu” screen reappears.

5Manual background To cancel the settings, select “Level Clear” and “Yes” on the “Channel Level” screen, then make the settings again.

The level of each channel should be adjusted to 75 dB (C-weighted, slow meter mode) on a sound level meter at the listening position.

If a sound level meter is not available adjust the channels by ear so the sound levels are the same. Because adjusting the subwoofer level test tone by ear is difficult, use a well known music selection and adjust for natural balance.

NOTE: When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’s own volume control.

23

Page 23
Image 23
Denon AVR-2802/982 operating instructions Englis, Select the mode