Dvd Tv/Dbs | Denon AVR-2802/982 specs

ENGLIS

System setup items and default values (set upon shipment from the factory)

	System setup
Speaker	Input the combination of speakers in your system and their
Speaker	corresponding sizes (SMALL for regular speakers, LARGE for full-
Configuration	size, full-range) to automatically set the composition of the signals
	output from the speakers and the frequency response.

Front Sp.

Large

Center Sp.

Small

Default settings
Sub Woofer		Surround Sp.		Surround Back Sp.
Sub Woofer		Surround Sp.		Surround Back Sp.
Yes		Small		Small / 1spkr

q

	Crossover	Set the frequency (Hz) below which the bass sound of the various	80 Hz
	Frequency	speakers is to be output from the subwoofer.

Subwoofer mode

wSB CH Auto Flag Detect

eDelay Time

rChannelLevel

tDigital In Assignment

yOn Screen Display

This selects the subwoofer speaker for playing deep bass signals.

Set the method of playing the surround back channel for digital signals.

This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position.

This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum effects.

	Input
This assigns the digital input jacks for the different input	source
sources.	Digital
	Inputs

This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated.

LFE

DTS-ES / 6.1 Source Auto Flag Detect Mode = OFF

Front L & R

Center

Sub Woofer

Surround L & R

Surround Back

12 ft (3.6 m)

12 ft (3.6 m)

12 ft (3.6 m)

10 ft (3.0 m)

10 ft (3.0 m)

Front L

Front R

Center

Subwoofer

Surround

Surround

Surround Back

L

R

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

0 dB

CD

DVD

TV/DBS

CDR/TAPE

VDP

VCR-1

VCR-2

—

—

COAXIAL

OPTICAL 1

OPTICAL 2

OPTICAL 3

OFF

OFF

OFF

—

—

On Screen Display = ON

			A1 ~ A8		87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
			B1 ~B8		520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
u	Auto Tuner	FM stations are received automatically and stored in the memory.	C1 ~C8		90.1 MHz
u	Presets		C1 ~C8		90.1 MHz
			D1	~D8	90.1 MHz
			E1	~E8	90.1 MHz

63

Image 63

Denon AVR-2802/982 operating instructions Dvd Tv/Dbs

Contents

AVR-2802/982 English Francais Safety Instructions Before Using Table of Contents Features Connections Connecting the audio components Connecting video components Connecting a video component equipped with S-Video jacks Precaution when using S-jacksConnecting the video decks Connecting a monitor TV Monitor OUT jack Connecting a DVD player DVD in jacks Connection of AM antennas Connecting the antenna terminalsAM loop antenna assembly An F-type FM antenna cable plug can be connected directly Connecting the Multi Zone jacks Connecting the external input EXT. in jacks Connecting banana plugs Speaker system connectionsConnection the speaker terminals Englis Precautions when connecting speakers Front Panel Part Names and Functions System Call buttons Remote control unit Cursor buttons Setting UP the SystemSystem Setup button Enter button Before setting up the system Setting the type of speakersDisplay the System Setup Menu Parameters Press the Enter button to finalize the settingFrequency mode is sent to the subwoofer None…… Select this when no speakers are installed Crossover Frequency Setting the Crossover Frequency and Subwoofer modeAssignment of low frequency signal range Subwoofer mode Setting Preparations Setting the delay time Select Test Tone Mode Setting the channel level Select Auto or Manual Select the modeAdjust the level Volume To select the input source Setting the digital in assignment Auto tuner presets Setting the on-screen display OSD On-screen display signals After completing system setup Remote Control Unit Using the remote control unitInserting the batteries Operated Set mode switch 2 to the position for the component to beBe operated with this remote control Operating Denon audio components Preset memory Audio component Preset memory Video componentCombinations of Personal System Codes DVD VDP DVD player system buttons Operating a video component stored in the preset memoryVDP, VCR or TV Operate the video component Learning function Using the system call function System call functionSystem call buttons Clearing system call settings Storing signals Clearing learned remote control signals OperationBefore operating Select the input source to be played To select the input source when RECInput mode selection function Playing the input source Input signal display Digital PCM modeDigital DTS mode Analog mode Playback using the external input EXT. in jacks Adjusting the sound quality toneAfter starting playback Listening over headphones Turning the sound off temporarily mutingChecking the currently playing program source, etc Multi-source recording/playback Playing one source while recording another REC OUT mode Multi-zone playback with multi-source Before playing with the surround function Surround Select the Dolby Surround Pro Logic II mode Dolby Pro Logic indicator lightsFader function Center Width Control Surround parameters q Pro Logic II ModeDimension Control Panorama Control When playing Dolby Digital sources Set the input mode to Auto or DTSSelect the Dolby/DTS Surround mode Dolby Digital indicator lights Select the various parameters Adjust the parameter settings MenuDialogue Normalization Surround modes and their features DSP Surround SimulationPersonal Memory Plus Set the parameters DSP surround simulation When turned clockwise When turned counterclockwisePress the Surround Parameter button Tone control setting Music Cinema Surround modes and parameters Auto tuning Manual tuningListening to the Radio Checking the preset stations Preset memory Recalling preset stations Last Function MemoryInitialization of the Microprocessor Troubleshooting Movie theater sound field Types of multi-channel signalsAdditional Information Types of sources Movie audio Number of surround back speakers Surround back speakers When not using surround back speakers Speaker setting examples Dolby Digital compatible media and playback methods SurroundDolby Surround Dolby Digital Dolby Surround AC-3 Dolby Digital and Dolby Pro Logic DTS compatible media and playback methods DTS Digital Surround DTS Neo6 Cinema DTS-ESTMDiscreteDTS-ESTMMatrix DTS Neo6TM surround DVD TV/DBS Surround modes and parameters Specifications 14-14, Akasaka 4-CHOME, MINATO-KU, Tokyo 107-8011, Japan Page Page Page First name in digital audio Speaker Configuration Delay Time Digital In Assignment