Denon AVR-2802/982 Operation, ENGLIS Clearing “learned” remote control signals, Before operating

ENGLIS

Clearing “learned” remote control signals

		START	LEARNED/TX	RC-903
4
	SYSTEM CALL		POWER
	SET	CALL	OFF	ON / SOURCE
	DVD	VDP	TUNER	SHIFT

1 2 3

2	To clear “learned” remote control signals, set the slide switch
	to the position at which the signals were “learned”.

TV/DBS PHONO

	4		5	6
	VCR-1		CD	CDR / TAPE	CHANNEL
	7		8	9
	VCR-2/V.AUX				TV/VCR
	+10		0		A / B
	VOLUME				DISC SKIP+
		DOLBY / DTS
	SPEAKER	SURROUND		DIRECT
	DSP SIMULATION	5CH / 6CH STEREO		STEREO
					MASTER VOL.
	INPUT MODE	ANALOG		EXT.IN
2	AUDIO		TAPE	CDR/MD
			CD	MULTI	MUTING
	AVR/AVC	VIDEO	DVD	TV		3
			VDP	VCR
			SYSTEM		SURROUND
	TUNING		SETUP		PARAMETER

	BAND	TITLE	MENU/GUIDE
			CH SELECT
	MODE		ENTER
			SELECT
	MEMORY	STATUS	ON SCREEN
1,5		DISPLAY	RETURN
	USE/LEARN T.TONE	MULTI	DVD
			SET UP

1	Press the USE/LEARN selector button with the tip of a pen,
	etc., to set the learn mode.

9 OPERATION

Before operating

1	Refer to “CONNECTIONS” (pages 6 to 13) and check that all
2	connections are correct.
	Set the remote control		unit’s slide	AUDIO
	switch to the AUDIO position. (only
	when operating	with	the remote	AVR/AVC VIDEO
3	control unit)
	Turn on the power.
	Press the POWER switch (button).
	ON / STANDBY			ON/STANDBY
			ON / SOURCE
				Light
	(Main unit)	(Remote control unit)

When pressed, the power turns on and the display lights. The sound is muted for several seconds, after which the unit operates normally. When pressed again, the power turns off, the standby mode is set and the display turns off.

Whenever the ON/STANDBY button is in the STANDBY state, the apparatus is still connected on AC line voltage. Please be sure to unplug the cord when you leave home for, say, a vacation.

4	Select the front speakers.
	Press SPEAKER A or B turn the speaker on.

AUDIO
AVR/AVC	VIDEO

3	Set the slide switch to the position at which the signals were
	“learned”.
		TAPE	CDR/MD
	CD			MULTI
		DVD		TV
		VDP	VCR

4	Press the SYSTEM CALL SET button, and hold it in for at least
	four seconds.

•When both the START and LEARNED/TX LEDs light simultaneously, all the stored codes are cleared.

Light

SET

5 Press the USE/LEARN selector button.

B

3 4

	TV/DBS		PHONO
	4	5	6
	VCR-1	CD	CDR / TAPE	CHANNEL
	7	8	9
	VCR-2/V.AUX			TV/VCR
	+10	0		A / B
	VOLUME			DISC SKIP+
4		DOLBY / DTS
	SPEAKER	SURROUND	DIRECT
	DSP SIMULATION	5CH / 6CH STEREO	STEREO
				MASTER VOL.
	INPUT MODE	ANALOG	EXT.IN

2	AUDIO		TAPE	CDR/MD
			CD	MULTI	MUTING
	AVR/AVC	VIDEO	DVD	TV
			VDP	VCR

	SYSTEM	SURROUND
TUNING	SETUP	PARAMETER
BAND	TITLE	MENU/GUIDE
		CH SELECT
MODE		ENTER
		SELECT
MEMORY	STATUS	ON SCREEN
	DISPLAY	RETURN

USE/LEARN T.TONE MULTI SET UP

SPEAKER

35