Denon AVR-2802/982 Digital In Assignment, On Screen Display, Auto Tuner Presets

Use the “Up/Down” arrows to raise/lower the level from each channel, and use the “Left/Right” arrows to select the channel to adjust. Take your time!

•We recommend that once you have completed adjusting the levels, to write down and secure, the levels for every channel. This will help you to reset the system quickly to reference if someone changes the levels, which you know will happen.

•Once finished press the “Enter” key. If you have the system exampled above, go back into Channel Level and reconfigure the speakers for further level adjustments.

.

Digital In Assignment

lThis setting assigns the digital input jacks of the AVR-2802 to the different input sources you have connected to it; i.e. DVD, CD, SAT, MD, CDR etc.

lUse the “Up/Down” arrow keys to select the input source you wish to adjust, then using the “Left/Right” keys to select to digital input you have used for that source.

lMake note that no two sources can share the same digital input.

lFor those input sources that have no digital inputs assigned, select ‘off’.

lWhen complete, press the “Enter” key.

On Screen Display

lThis setting toggles the Display ‘On’ or ‘off’. For convenience sake, leave in the ‘On’ position.

Auto Tuner Presets

lThis setting, when activated, will allow the AVR-2802 to automatically find and store into memory, up to 40 FM radio stations. If a station with poor reception is not stored automatically, you can manually store it into memory.

lBe sure an antenna is attached properly!

lWhen the AVR-2802 has finished searching and locking in stations into memory, the Setup is complete. Simple press the System Setup button to exit out. Enjoy.

4