Denon AVR-2802/982 operating instructions Setting the SB CH Auto Flag Detect, English

ENGLISH

Setting the SB CH Auto Flag Detect

Set the operation for the digital signals when playing in the 6.1 SURROUND and DTS-ES surround modes.

1	ENTER	At the System Setup Menu select “SB CH Auto Flag
		Detect” and press the ENTER button.

2 Select the desired setting.

We recommend setting this to “OFF”.

When set to “ON”, then set the operation for software for which no identification signals are recorded (Non-Flag Source).

Setting

qAuto Flag Detect Mode (AFDM)

ON:	This function only works for sources containing DTS-ES or 6.1-channel surround identification signals.
	When this function is used, sources that have been recorded in 6.1-channel surround or DTS-ES are automatically played in the 6.1-
	channel surround mode using the surround back speaker(s). (Refer to w for the method of playback of the surround back speaker in
	this case.)
OFF:	Set this mode if you wish to play normal 5.1-channel sources or sources not containing the identification signals in the 6.1-channel
	mode.

wNon-Flag Source SBch Output

	MTRX ON:	Sources are played using the surround back speaker(s). The surround back channel is played with digital matrix processing.
	NON-MTRX:	Sources are played using the surround back speaker(s). The same signals as those of the surround channel are output from
		the surround back speaker(s).
	OFF:	Sources are played without using the surround back speaker(s).
3	ENTER	Enter the setting.
		The System Setup Menu reappears.

NOTES:

•The SB CH Auto Flag Detect setting screen is displayed when the surround back speaker(s) is/are set to “Large” or “Small” at the “Speaker Configuration” screen.

•The surround back speaker(s) can also be turned on and off with the 6.1/7.1 SURROUND button on the main unit. (See page 45.)

20