Cisco Systems 15216 EDFA2 manual Rtrv-Dwdm, Timeout Integer Timeout in minutes, CommandRTRV-DWDM

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-39 RTRV-DFLT-SECU Syntax Description

Parameter	Syntax	Description
date	yyyy-mm-dd	Date of origination of TL1 message.
time	hh:mm:ss	Time of origination of TL1 message.
aid		EQPT and ALL have same input effect.
	EQPT	General parameters of the ONS 15216 EDFA2 (not directly
		affecting optical signal or power bus).
	ALL	Any or all of the preceding (command input only).
al		Access level of the user. See “Summary of Security Permissions
		for TL1 Commands” section on page 9-6for access level
		permissions.
	R	Read only privileges.
	RW	Read and write privileges.
	RWA	Read, write, and administrative privileges.
timeout	integer	Timeout in minutes.

9.7.33 RTRV-DWDM

CommandRTRV-DWDM

Retrieves the ONS 15216 EDFA2 optical control configuration.

SyntaxRTRV-DWDM:[<tid>]:<aid>:<ctag>; <sid> <date> <time>

M <ctag> COMPLD "<aid>:INPWRMICROW=<inputpoweruw>,INPWRDBM=<inputpowerdbm>,OUTPWRMILLIW=<outputpowermw>

,OUTPWRDBM=<outputpowerdbm>,PUMP1CTRLMODE=<pump1ctrlmode>,PUMP1CTRLVALUE=<pump1ctrlvalue>,

PUMP2CTRLMODE=<pump2ctrlmode>,PUMP2CTRLVALUE=<pump2ctrlvalue>,OVERALLGAINMEASURED=<gainmea

sured>,CONFIGGAIN=<gain>,PREATTMEASURED=<preattmeasured>"

;

Example 9-35 RTRV-DWDM Command and Response

Amp01:ONS15216 EDFA2> RTRV-DWDM:Amp01:ALL:123;

Amp01 2002-06-20 14:30:00

M124 COMPLD "1:INPWRMICROW=264,INPWRDBM=-1578,OUTPWRMILLIW=172,OUTPWRDBM=237,PUMP1CTRLMODE=GAINTEMP

,PUMP1CTRLVALUE=169,PUMP2CTRLMODE=GAINTEMP,PUMP2CTRLVALUE=169,OVERALLGAINMEASURED=169,CONF

IGGAIN=170,PREATTMEASURED=60"

;

Cisco ONS 15216 EDFA2 Operations Guide

9-48 78-16033-01