Cisco Systems 15216 EDFA2 manual Output Power, Loss of Signal Input Power Alarm Threshold

Chapter 5 SNMP MIB Installation and Configuration

Retrieving Information

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

5.6.6.2 Loss of Signal (Input Power) Alarm Threshold

Command snmp attribute get local cerent15216EdfaLOSThreshold

Syntax Description snmp attribute get local cerent15216EdfaLOSThreshold

Displays the loss of signal (input power) alarm threshold.

The following command displays the loss of input power alarm threshold and other laser power and temperature data:

•snmp row display local cerent15216EdfaCfgGroup command

The cerent15216EdfaLOSThreshold attribute in the cerent15216EdfaCfgGroup display command shows the loss of input power alarm threshold (Example 5-14 on page 5-28).

For information about all of the parameters in the cerent15216EdfaCfgGroup table, refer to Table 5-6 on page 5-12.

5.6.6.3 Loss of Signal (Input Power) Alarm Hysteresis

Command snmp attribute get local cerent15216EdfaLOSHysteresis

Syntax Description snmp attribute get local cerent15216EdfaLOSHysteresis

Displays the loss of signal (input power) alarm hysteresis value.

The following command displays the loss of input power hysteresis value and other laser power and temperature data:

•snmp row display local cerent15216EdfaCfgGroup command

The cerent15216EdfaLOSHysterisis attribute in the cerent15216EdfaCfgGroup display command shows the loss of input power alarm threshold (Example 5-14 on page 5-28). For information about all of the parameters in the cerent15216EdfaCfgGroup table, refer to Table 5-6 on page 5-12.

5.6.7 Output Power

5.6.7.1 Output Power Value

5.6.7.1.1 OutPowermW

Command snmp attribute get local cerent15216EdfaOutPowermW

Syntax Description snmp attribute get local cerent15216EdfaOutPowermW

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 5-31