Cisco Systems 15216 EDFA2 manual TL1 Commands and Autonomous Messages, Act-User, Alw-Msg-All

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

9.7 TL1 Commands and Autonomous Messages

9.7.1 ACT-USER

CommandACT-USER

Activates user session (login).

SyntaxACT-USER:[<tid>]:<uid>:<ctag>::<pid>;

Example 9-1 ACT-USER Command

Amp01:ONS15216 EDFA2> ACT-USER:Amp01:JOE:123::***;

Table 9-9 ACT-USER Syntax Description

Parameter	Syntax	Description
uid	string	The user’s identifier (user name). Can be any combination of up
		to 10 alphanumeric characters.
pid	string	The user’s private identifier (password). The password must be
		a string of up to 10 characters, where at least 2 are
		non-alphabetic characters and at least 1 is a special character.
		Special characters are +, #, and %. (defined in Telcordia
		GR-831-CORE).

9.7.2 ALW-MSG-ALL

CommandALW-MSG-ALL

Permits or resumes the dispatch of automatic messages from the ONS 15216 EDFA2 that were inhibited by an INH-MSGcall. All alarms in existence at the time that this command restores them are transmitted via REPT ALM and REPT EVT messages.

SyntaxALW-MSG-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>][,];

Example 9-2 ALW-MSG-ALL Command

Amp01:ONS15216 EDFA2> ALW-MSG-ALL:Amp01::123::MJ,LOS;

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-9