Cisco Systems 15216 EDFA2 manual Inh-Msg-All, Permissions, CommandINH-MSG-ALL

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-22 ENT-USER-SECU Syntax Description

Parameter	Syntax	Description
uid	string	The user identifier (user name) of the new user being created.
		Can be any combination of up to 10 alphanumeric characters.
pid	string	The user’s private identifier (password). Must be a string of up
		to 10 characters, where at least 2 are non-alphabetic characters
		and at least 1 is a special character. Special characters are +, #,
		and %. (defined in Telcordia GR-831-CORE).
al		Access level of the user. See “Summary of Security Permissions
		for TL1 Commands” section on page 9-6for access level
		permissions.
	R	Read only privileges.
	RW	Read and write privileges.
	RWA	Read, write, and administrative privileges.

9.7.16 INH-MSG-ALL

CommandINH-MSG-ALL

Prohibits the dispatch of some automatic messages from the ONS 15216 EDFA2 as specified in the parameters. Does not affect response from RTRV commands.

SyntaxINH-MSG-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>][,];

Example 9-18 INH-MSG-ALL Command

Amp01:ONS15216 EDFA2> INH-MSG-ALL:Amp01::123::MJ,LOS;

Table 9-23 INH-MSG-ALL Syntax Description

Parameter	Syntax	Description
ntfncde		Notification code of the alarm or event that is to be
		allowed (maps to cerent15216EdfaAlarmPriority for
		active alarms). A null maps to none of the codes, i.e.,
		with a null, all existing ntfncde inhibitions are kept
		unchanged. Possible values are:
	CR	Critical alarm.
	MJ	Major alarm.
	MN	Minor alarm.
	NA	No alarm.
	CL	Cleared alarm.

Cisco ONS 15216 EDFA2 Operations Guide

9-22 78-16033-01