Cisco Systems 15216 EDFA2 manual ConstOutputPower. a valid mode only for pump, Idle

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-40 RTRV-DWDM Syntax Description

Parameter	Syntax	Description
date	yyyy-mm-dd	Date of origination of TL1 message.
time	hh:mm:ss	Time of origination of TL1 message.
aid		1 and ALL have same input effect.
	1	Directly affecting the optical signal.
	ALL	Any or all of the preceding (command input only).
inputpoweruw	0 - 99999	Input power (signal) in units of 10 microW
		(cerent15216EdfaInPoweruW).
inputpowerdbm	–999999 -	Input power (signal) in units of 100 dBm
	999999	(cerent15216EdfaInPowerdBm).
outputpowermw	0 - 999999	Output power in units of 100 mW
		(cerent15216EdfaOutPowermW).
outputpowerdbm	–99999 - 99999	Output power in units of 100 dBm
		(cerent15216EdfaOutPowerdBm).
pump1ctrlmode,		Pump 1 or pump 2 control mode (maps to
pump2ctrlmode		cerent15216EdfaPumpCfgControlMode for the corresponding
		pump). Possible values are:
	GAINTEMP	Constant Gain Temperature Compensated mode (manufacturer
		default) (cerent15216EdfaPumpCfgControlMode set to
		constGainTempComp).
	OPWR	Constant Output Power mode
		(cerent15216EdfaPumpCfgControlMode set to
		constOutputPower). A valid mode only for pump 2.
	CRNT	Constant Pump Current mode
		(cerent15216EdfaPumpCfgControlMode set to constCurrent).
	PWR	Constant Pump Power mode
		(cerent15216EdfaPumpCfgControlMode set to constPower).
	IDLE	Pump is shut down (cerent15216EdfaPumpCfgControlMode
		set to idle).
pump1ctrlvalue,		Pump 1 or pump 2 control value. This value’s interpretation
pump2ctrlvalue		depends on the control mode of the corresponding pump.
		Possible values are:
	0 - 650	Output power in units of 10 mW when mode is OPWR (gets
		cerent15216EdfaPumpCfgConstOutPower).
	0 - 300	Current value in mA when mode is CRNT (gets
		cerent15216EdfaPumpCfgConstPumpCurrent).
	0 - 100	Pump power in mW when mode is PWR (gets
		cerent15216EdfaPumpCfgConstPumpPower).
gainmeasured	0 - 230	Value of gain in units of 10 dB when mode is GAINTEMP (gets
		cerent15216EdfaConstGainOverallGainMeasured).

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-49