Cisco Systems 15216 EDFA2 manual CfgGroup Table, Maximum Variable Syntax Access Description

Chapter 5 SNMP MIB Installation and Configuration

Tables and Groups

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

5.4.1 CfgGroup Table

The cerent15216EdfaCfgGroup table is used to set or get alarm threshold configuration. The associated table command provides a summary of all alarm thresholds. See Table 5-6for variable definitions. For more information on alarm thresholds, see the “Set Alarm Thresholds” section on page 4-5.

Table 5-6 cerent15216EdfaCfgGroup Variable Descriptions

		Maximum
Variable	Syntax	Access	Description
cerent15216EdfaCfgSaved	True Value	Read-only	Indicates whether the current
			configuration has been saved.
cerent15216EdfaLpoutSetp	Integer	Read-only	Loss of pump output power set point
oint	(0 to 1000)		for the Lpout alarm (*10 mW).
			This is set when the
			cerent15216EdfaPumpCfgConstOutP
			ower attribute is set for pump 2.
cerent15216EdfaLpoutDevi	Integer	Read-write	Amount that the output power must
ation	(0 to 1000)		deviate from the set point to set the
			Lpout alarm (*100 dB).
cerent15216EdfaLpoutHyst	Integer	Read-write	Amount that the output power must
eresis	(0 to 1000)		move towards the set point before the
			Lpout alarm is cleared (*100 dB).
cerent15216EdfaLOSThres	Integer	Read-write	Loss of signal threshold (*100 dBm).
hold	(–3100 to –1500)
cerent15216EdfaLOSHyster	Integer	Read-write	Amount above
esis	(0 to 1000)		cerent15216EdfaLOSThreshold that
			the input signal must rise before the
			Lpin alarm is cleared (*100 dB).
cerent15216EdfaCtmpMin	Integer	Read-write	Minimum allowable case temperature
	(–10 to 10)		in degrees Celsius.
cerent15216EdfaCtmpMinH	Integer	Read-write	Amount above
ysteresis	(0 to 10)		cerent15216EdfaCtmpMin that the
			case temperature must rise before the
			Ctmp alarm is cleared in degrees
			Celsius.
cerent15216EdfaCtmpMax	Integer	Read-write	Maximum allowable case temperature
	(20 to 70)		in degrees Celsius.
cerent15216EdfaCtmpMax	Integer	Read-write	Amount below
Hysteresis	(0 to 10)		cerent15216EdfaCtmpMax that the
			case temperature must drop before the
			Ctmp alarm is cleared in degrees
			Celsius.

Cisco ONS 15216 EDFA2 Operations Guide

5-12 78-16033-01