Cisco Systems 15216 EDFA2 manual Date and Time, Attribute Description

Chapter 5 SNMP MIB Installation and Configuration

Retrieving Information

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 5-15 cerent15216EdfaSromIpMgmtGroup Command Attributes

Attribute	Description
cerent15216EdfaSromIpMgmtEnetAddress	The IP address used by the system Ethernet
	management port. If set to 0.0.0.0, IP traffic is not
	supported over the Ethernet interface.
cerent15216EdfaSromIpMgmtDefaultRouterAd	The default router (gateway) address for the
dress	network.
cerent15216EdfaSromIpMgmtEnetSubNetMask	The IP subnet mask for the Ethernet management
	port.
cerent15216EdfaSromIpMgmtHostName	The host name of the system.

5.6.2 Date and Time

Command snmp attribute get local cerent15216EdfaRtcDateAndTime

Syntax Description snmp attribute get local cerent15216EdfaRtcDateAndTime

Displays the date and time for the ONS 15216 EDFA2.

The following SNMP command displays the date and time for the ONS 15216 EDFA2 and other time data:

•snmp row display local cerent15216EdfaRtcDateAndTime command

The following SNMP command sets the date and time for the ONS 15216 EDFA2 and other time data:

•snmp attribute set local cerent15216EdfaRtcDateAndTimeLocalString command

When setting the local time of day, set the time zone first, set the DST offset second, and set the local time last. Entries must follow this format: “yyyy-m-d,h:m:s.s +h:m”. Following the space, the time zone is set as +/– hours from Greenwich Mean Time (GMT) (also designated as universal coordinated time (UTC)) followed by a colon and minutes ahead for daylight savings. For example, Pacific Daylight Time would be –8:60 and Greenwich Mean Time would be +0:0.

Example 5-11displays the ONS 15216 EDFA2 command for displaying the date and time.

Example 5-11 cerent15216EdfaRtcDateAndTime Display Command

ash:hostname:ONS15216 EDFA2> snmp row display local cerent15216EdfaRtcDateAndTime

CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaRtcDateAndTime ::=

{

cerent15216EdfaRtcDateAndTimeLocal = '07d20716070a2a042d083c'H; cerent15216EdfaRtcDateAndTimeGMT = '07d207160e0a2a042b0000'H; cerent15216EdfaRtcDateAndTimeLocalString = "2002-7-22,7:10:42.4 -8:60"; cerent15216EdfaRtcDateAndTimeGMTString = "2002-7-22,14:10:42.4 +0:0"; cerent15216EdfaRtcDateAndTimeTimezone = -8; cerent15216EdfaRtcDateAndTimeSaving = 60; cerent15216EdfaRtcDateAndTimeFormsString = "07/22/2002 07:10:42";

};

Table 5-16describes the attributes displayed by these commands.

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 5-25