Cisco Systems 15216 EDFA2 manual HyperTerminal Connect To Dialog Box

Chapter 3 Installation

Communications

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Step 5 In the Connect To dialog box (Figure 3-2), click Direct to Com1 in the Connect using field. Click OK.

Figure 3-2 HyperTerminal Connect To Dialog Box

Step 6 Configure the Port Settings in the COM1 Properties dialog box as shown in Figure 3-3 on page 3-9. The Port Settings must be configured as follows:

•Bits per second—19200

•Data bits—8

•Parity—None

•Stop bits—1

•Flow control—None Click OK when done.

Cisco ONS 15216 EDFA2 Operations Guide

3-8 78-16033-01