FINAL DRAFT - CISCO CONFIDENTIAL
9-20
CiscoONS 15216 EDFA2 Operations Guide
78-16033-01
Chapter9 TL1 Commands
TL1 Commands and Autonomous Messages
9.7.13 ED-PID
Command ED-PID
Edits password.
Syntax ED-PID:[<tid>]:<uid>:<ctag>::<oldpid>,<newpid>;
Example 9-15 ED-PID Command
Amp01:ONS15216 EDFA2> ED-PID:Amp01:JOE:123::OLDPW,NEWPW;
bootfilename1 string Boot file name (cerent15216EdfaBootFileName for first entry).
File names are case sensitive.
bootipaddr1 string IP address to boot from if bootrectype1 is set to TFTP
(cerent15216EdfaBootIpAddress for first entry).
bootrectype2 Boot record type (cerent15216EdfaBootType for second entry).
Possible values are:
FLASH Boot from flash.
TFTP Boot through TFTP.
bootfilename2 string Boot file name (cerent15216EdfaBootFileName for second
entry). File names are case sensitive.
bootipaddr2 string IP address to boot from if bootrectype2 is set to TFTP
(cerent15216EdfaBootIpAddress for second entry).
cli Default type of command line interface for all EIA/TIA-232
and default telnet port user sessions with the
ONS 15216 EDFA2. Possible values are:
TL1 TL1shell interface (manufacturer default).
ASH ASH shell interface – ONS 15216 EDFA2’s native interface.
Table9-19 ED-NE-GEN Syntax Description (continued)
Parameter Syntax Description
Table9-20 ED-PID Syntax Description
Parameter Syntax Description
uid string The user’s identifier (user name).
oldpid string The user’s old password.
newpid string The user’s new private identifier (password). Must be a string
of up to 10 characters, where at least 2 are non-alphabetic
characters and at least 1 is a special character. Special characters
are +, #, and %. (defined in Telcordia GR-831-CORE).