Cisco Systems 15216 EDFA2 manual Then enter the following command at the hostname prompt

Chapter 4 Provisioning Using ASH and SNMP

Log In via RS-232 (EIA/TIA-232) Port Using HyperTerminal

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Step 3 If you see the login window shown in Example 4-1 on page 4-2, skip to Step 4.

By default the ONS 15216 EDFA2 is in TL1 shell, so this step may be required to proceed in ASH shell. When in TL1 shell, the screen opens to a simple prompt (sidtidname:ONS15216 EDFA2>). To change to ASH shell, log in using the procedure in “Log In via RS-232(EIA/TIA-232) Port Using HyperTerminal” section on page 8-1, and then enter the following command at the sid/tid name prompt:

Welcome to ONS15216 EDFA2 Console (v2.3.0)

sidtidname:ONS15216 EDFA2> ED-NE-GEN:::123:::CLI=ASH;

Then enter the following command at the hostname prompt:

sidtidname:ONS15216 EDFA2> INIT-SYS::ALL:1234::1;

The ONS 15216 EDFA2 should log you off and then bring up the ASH shell login window.

Step 4 Check that the ONS 15216 EDFA2 login window appears as shown in Example 4-1.

Example 4-1 ASH Shell Login Window

--LOGIN ---------------------------------------------------- sysname

ONS15216 EDFA2 Optical Amplifier

--------------------------------

Software Version 2.3.0

Copyright (c) 2000-2003 Cisco Systems, Inc.

Username:	{	}
Password:	{	}
	[Login]

Step 5 Enter both a user name and password.

The default user name and password is CISCO15 with no password (press Enter).

Note For security reasons, it is recommended to change the password from its default value. See Set Password, page 4-10or Set Password, page 8-10.

Step 6 Press Enter when [Login] becomes highlighted. Example 4-2displays the login response.

Example 4-2 ASH Shell Login Response

Welcome to ONS15216 EDFA2 Console (v2.3.0)

ash:hostname:ONS15216 EDFA2>

An EIA/TIA-232 link to the ONS 15216 EDFA2 is established. The user can now provision the ONS 15216 EDFA2.

Cisco ONS 15216 EDFA2 Operations Guide

4-2 78-16033-01