Cisco Systems 15216 EDFA2 manual Rept ALM ENV, Date Yyyy-mm-dd Date of origination of TL1 message

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

9.7.19 REPT ALM ENV

Command		REPT ALM ENV
		Reports when a power bus alarm is logged or cleared (derived from cerent15216EdfaAlarmState).
Syntax		<sid> <date> <time>
		<almcde> <atag> REPT ALM ENV
		"<aid>:<ntfcncde>,<condtype>,<ocrdat>,<ocrtm>,<conddescr>"
	;
		Example 9-21 REPT ALM ENV Message
		Amp01 2001-06-18 14:48:44
		** 141 REPT ALM ENV
		"PWR-A:MN,PWRBUSA,6-18,14-48-44,\"Power Bus A Alarm\""
	;
		Table 9-26 REPT ALM ENV Syntax Description
		Parameter	Syntax	Description
		almcde		The alarm severity code for the TL1 message. Possible values
				are:
			*C	Critical alarm.
			**	Major alarm.
			*	Minor alarm.
			A	No alarm. Occurs only when ntfncde is NA.
		atag	0 - 999	An integer between 0 and 999 used as a sequence number in
				autonomous messages .
		aid		Possible values are:
			PWR-A	Affecting Power Bus A (or both A and B).
			PWR-B	Affecting Power Bus B.
		conddescr		Detailed text description of the event. The conddescr is 1 to 64
				characters of ASCII text. See condtype below.
		condtype		Condition type identifies the type of alarm (maps to
				cerent15216EdfaLogEventID). Possible condtype and
				corresponding conddescr (in quotes) are:
			PWRBUSA	“Power Bus A (voltage) Alarm”
				(cerent15216EdfaAlarmPowerBusA).
			PWRBUSB	“Power Bus B (voltage) Alarm”
				(cerent15216EdfaAlarmPowerBusB).
		date	yyyy-mm-dd	Date of origination of TL1 message.

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-27