Cisco Systems 15216 EDFA2 manual Example 9-22 Rept ALM Eqpt Message

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-26 REPT ALM ENV Syntax Description (continued)

Parameter	Syntax	Description
ntfncde		Notification code (maps to cerent15216EdfaAlarmPriority).
		Possible values are:
	CR	Critical alarm.
	MJ	Major alarm.
	MN	Minor alarm.
	CL	Cleared alarm.
	NA	No alarm.
ocrdat	m-d	Date (month-day) of the event occurrence (derived from
		cerent15216EdfaDateAndTimeString).
ocrtm	h-m-s	Time (hour-minute-second) of the event occurrence (derived
		from cerent15216EdfaDateAndTimeString).
sid	string	Source identifier uniquely identifies the source of a TL1
		autonomous command.
time	hh:mm:ss	Time of origination of TL1 message.

9.7.20 REPT ALM EQPT

Command REPT ALM EQPT

Reports when a general alarm (not directly affecting optical signal or power bus) is logged or cleared (derived from cerent15216EdfaAlarmState).

Syntax	<sid>	<date>	<time>
	<almcde>	<atag>	REPT ALM EQPT

"<aid>:<ntfcncde>,<condtype>,<srveff>,<ocrdat>,<ocrtm>,,:<conddescr>"

;

Example 9-22 REPT ALM EQPT Message

Amp01 2001-06-18 14:48:44

*141 REPT ALM EQPT "EQPT:MN,LCRNT1,NSA,6-18,14-48-44,,:\"Excessive Pump1 Current\""

;

Cisco ONS 15216 EDFA2 Operations Guide

9-28 78-16033-01