Cisco Systems 15216 EDFA2 manual Set-Th-Env, CommandSET-TH-ENV

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 9-52 SET-TH-DWDM Syntax Description (continued)

Parameter	Syntax	Description
threshholdtype	string	Type of threshold that is to be set. The threshold is set to the
and		thresholdvalue that follows the comma. Possible to specify
thresholdvalue		values for one or more of the following:
pairs
	LOSHYST	Loss of signal (input power) hysteresis
		(cerent15216EdfaLOSHysteresis).
		thresholdvalue can be between 0 and 1000, with default of
		100, in units of 100 dB.
	LOSTH	Loss of signal (input power) threshold
		(cerent15216EdfaLOSThreshold).
		thresholdvalue can be between –3100 and –1500, with
		default of –3000, in units of 100 dBm.
	LPOUTDEV	Loss of output power deviation
		(cerent15216EdfaLpoutDeviation).
		thresholdvalue can be between 0 and 1000, with default of
		200, in units of 100 dB.
	LPOUTHYST	Loss of output power hysteresis
		(cerent15216EdfaLpoutHysteresis).
		thresholdvalue can be between 0 and 1000, with default of
		100, in units of 100 dB.

9.7.46 SET-TH-ENV

CommandSET-TH-ENV

Sets threshold values of the environmental (power bus) parameters of the ONS 15216 EDFA2.

SyntaxSET-TH-ENV:[<tid>]:<aid>:<ctag>::<thresholdtype>,<thresholdvalue>[,,];

Example 9-49 SET-TH-ENV Command

Amp01:ONS15216 EDFA2> SET-TH-ENV:Amp01:PWR-A:100::PWRBUSMIN,450;

Table 9-53 SET-TH-ENV Syntax Description

Parameter	Syntax	Description
aid		PWR-A, PWR-B, and ALL have same input effect.
	PWR-A	Sets Power Bus A and Power Bus B.
	PWR-B	Sets Power Bus A and Power Bus B.
	ALL	Any or all of the preceding (command input only).

Cisco ONS 15216 EDFA2 Operations Guide

9-62 78-16033-01