Cisco Systems 15216 EDFA2 manual 4displays the definitions for the community entry values

Chapter 5 SNMP MIB Installation and Configuration

Enabling SNMP Remote Management Community Strings

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

cerent15216EdfaCommName "" cerent15216EdfaCommViewIndex 0 cerent15216EdfaCommPrivileges 35 cerent15216EdfaCommSrcIPAddr 0.0.0.0 cerent15216EdfaCommNetMask 0.0.0.0 cerent15216EdfaCommStatus 0

cerent15216EdfaCommStatus OBJECT-TYPE SYNTAX INTEGER

{

active(1),

notInService(2),

notReady(3),

createAndGo(4),

createAndWait(5),

destroy(6)

}

MAX-ACCESS read-create

DESCRIPTION

::= { cerent15216EdfaCommunityEntry 7 }

Table 5-4displays the definitions for the community entry values.

Table 5-4 Creating a Community Entry

Data Prompt	Description
cerent15216EdfaCommIndex	Community Index: An index that uniquely identifies a
	particular SNMP community. This community index is part of
	the command. In Example 5-4 on page 5-7, it is “3”.
cerent15216EdfaCommName	Community Name: The community string.
cerent15216EdfaCommViewIndex	View Index: The view index specifies which MIBs this
	particular community string can access.
cerent15216EdfaCommPrivileges	Privileges: A bitmap of access privileges that govern what
	management operations a particular community can perform.
	These privileges are expressed as a sum of values, where each
	value represents a particular operation. Refer to Table 5-5 on
	page 5-9for the SNMP Operation Decimal Values.
cerent15216EdfaCommSrcIPAddr	Source IP Address: The IP address from which network
	management traffic for this community originates.
cerent15216EdfaCommNetMask	NetMask: The subnet mask for the source IP address.
cerent15216EdfaCommStatus	Status: The status of this conceptual row in the community
	table.Use createAndGo to create a new row. Use active to
	modify an existing row.

Cisco ONS 15216 EDFA2 Operations Guide

5-8 78-16033-01