≥If the connections are correct, there might be a problem with the cables. Redo the connections with different cables.
≥Check the audio output settings on the connected device.
≥If the HDMI 2 indicator flashes and there is no audio output, try the following.
1 Turn the connected device off and then on.
2 Turn off this system, remove the HDMI cable, then reconnect the HDMI cable and turn this system back on.
The dual audio cannot be changed from main to secondary.
If the audio received from the connected device is not “Dolby Dual Mono” or the output setting is not “Bitstream”, the setting cannot be changed from this system. Change the setting on the connected device.
The volume is lowered when this system is turned on.
If this system is turned off with the volume setting in the greater half (above 50), this system will automatically lower the volume to the middle (50) when this system is turned on. (> 25)
The dialog is too persistent or the dialog does not sound natural.
This system has a function to make the dialog stand out when the volume is low. (> 25)
There is no audio.
The power of this system turns off automatically.
(When this system detects a problem, a safety measure is activated and this system automatically switches to standby mode.)
≥There is a problem with the amplifier.
≥Is the volume extremely high? If so, lower the volume.
≥Is this system placed in an extremely hot place?
If so, move this system to a cooler place and wait a few moments and then try to turn it on again.
If the problem persists, confirm the TV indicator and HDMI 2 indicator blink, turn the system off, remove the AC power supply cord and consult your dealer. Please be sure to remember the indicators that were blinking and inform the dealer.
Indicator illumination
The indicators display the condition of this system by flashing. The indicator patterns illustrated below are displayed during normal operational conditions. They do not refer to the indications of a problem. Refer to “Troubleshooting” (> 26) if the indicators do not light as illustrated below.
Indicator | Description | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The indicators blink from left to right (i) or from right to left (s). |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ≥ When the speaker volume or the subwoofer level is adjusted (> 22) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The indicators blink simultaneously. |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ≥ When “MUTE” is on (> 22) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The indicator blinks for 10 sec. |
|
|
|
|
|
|
|
|
|
| ≥ When the audio output mode is |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ≥ When 3D surround effect and |
|
|
|
|
|
|
|
|
|
| ≥ When the dual audio setting is Main (> 25) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The indicator blinks for 10 sec. |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ≥ When the audio output mode is Auto mode (> 23) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The indicator blinks for 10 sec. |
|
|
|
|
|
|
|
|
|
| ≥ When the audio output mode is 2ch mode (> 23) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ≥ When Dolby Virtual Speaker is on (> 25) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ≥ When the dual audio setting is Secondary (SAP: Secondary Audio Program) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| (> 25) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| The indicators blink for 10 sec. |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ≥ When the dual audio setting is Main and Secondary (> 25) |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The indicators blink for 10 sec.
≥When the remote control code is changed (> 25)
The indicators blink once.
≥ When changing the setting (To turn off VIERA Link “HDAVI Control”, To reduce the
Reference
27
VQT3Q59
