When placing the speakers on a table
Place the speakers using the stands
∏ | 1 | Speaker (L) | ∏ | 1 | Speaker (R) | ∏ | 2 | Speaker cables |
|
|
|
|
|
|
|
| (L): WHITE |
|
|
|
|
|
|
|
| (R): RED |
∏ | 1 | Speaker joint | ∏ | 2 | Stands | ∏ | 6 | Screws A |
|
|
|
|
|
|
|
| (Large) |
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 to 3 of “Place the speakers horizontally” (> 10).
Attach the stands.
≥Keep the screws out of reach of children to prevent swallowing.
AScrew A (supplied) B Screw hole
Align the holes with the projecting parts on the speaker.
Do not use these holes for the alignment. If these are used, the screw does not fit.
Getting started
13
VQT3Q59