Place the speakers using the base stands
∏ | 1 Speaker (L) | ∏ | 1 Speaker (R) | ∏ 2 Speaker cables |
|
|
|
| (L): WHITE |
|
|
|
| (R): RED |
∏ | 2 Bases | ∏ | 2 Screws B |
|
|
|
| (Small) |
|
≥For a safety measure to prevent the speakers from falling, refer to page 16.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Insert the speaker cable through the base.
≥Be sure to insert the speaker cable through the threading hole as indicated in the illustration.
Leave about 110 mm (421/64q)
Position the cable between the ridges.
started
A Threading hole | B Screw hole |
Attach the speaker to the base.
≥To make sure that the speaker cable is connected to the correct speaker, match the color of the speaker connector with the color of the L/R indicator on the speaker label so as not to connect the speaker cable to the wrong speaker.
≥Keep the screws out of reach of children to prevent swallowing.
Screw B (supplied)
≥ Tighten securely. |
(Continued on the next page)
Getting
15
VQT3Q59
