Cisco Systems 15216 EDFA2 manual Power Gain, cerent15216EdfaRtcDateAndTime Command Attributes

Chapter 5 SNMP MIB Installation and Configuration

Retrieving Information

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Table 5-16 cerent15216EdfaRtcDateAndTime Command Attributes

Attribute	Description
cerent15216EdfaRtcDateAndTimeLocal	The current local time.
cerent15216EdfaRtcDateAndTimeGMT	The current GMT time.
cerent15216EdfaRtcDateAndTimeLocalString	The current local time.
cerent15216EdfaRtcDateAndTimeGMTString	The current GMT time.
cerent15216EdfaRtcDateAndTimeTimezone	The time zone in hours from GMT.
cerent15216EdfaRtcDateAndTimeSaving	The current daylight saving offset in minutes.
cerent15216EdfaRtcDateAndTimeFormsString	The current local time.

5.6.3 Power Gain

Command snmp attribute get local cerentEdfa15216EdfaConstGainOverallGain

Syntax Description snmp attribute get local cerentEdfa15216EdfaConstGainOverallGain #

Displays the overall power gain when the ONS 15216 EDFA2 is in Constant Gain Temperature Compensated mode.

The following commands access overall power gain when in the Constant Gain Temperature

Compensated mode:

•snmp row display local cerent15216EdfaOverallControl command

•snmp row get local cerent15216EdfaOverallControl command

The cerent15216EdfaConstGainOverallGain attribute in cerent15216EdfaOverallControl display command shows the ONS 15216 EDFA2 power gain (Example 5-12 on page 5-26).

Example 5-12 cerent15216EdfaOverallControl Display Command

ash:hostname:ONS15216 EDFA2>snmp row display local cerent15216EdfaOverallControl

CLASS CERENT-15216-EDFA-MIB.cerent15216EdfaOverallControl ::=

{

cerent15216EdfaConstGainOverallGain = 220; cerent15216EdfaVariableGainPreAttenuation = 10;

};

For information about all of the parameters in the cerent15216EdfaOverallStatusGroup, refer to Table 5-8 on page 5-17.

Cisco ONS 15216 EDFA2 Operations Guide

5-26 78-16033-01