Cisco Systems 15216 EDFA2 manual Maximum case temperature cerent15216EdfaCtmpMax, Units of C

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

Example 9-44 RTRV-TH-EQPT Command and Response

Amp01:ONS15216 EDFA2> RTRV-TH-EQPT:Amp01:ALL:123::MAXCTMP;

Amp01 2001-06-08 09:00:05

M123 COMPLD "EQPT:MAXCTMP,,,60"

;

Table 9-48 RTRV-TH-EQPT Syntax Description

Parameter	Syntax	Description
date	yyyy-mm-dd	Date of origination of TL1 message.
time	hh:mm:ss	Time of origination of TL1 message.
aid		EQPT and ALL have same input effect.
	EQPT	General parameters of the ONS 15216 EDFA2 (not directly
		affecting optical signal or power bus).
	ALL	Any or all of the preceding (command input only).
threshholdtype		Type of threshold or set point that is to be retrieved. A null
and		value is equivalent to ALL. Possible to specify values for one
thresholdvalue		or more of the following:
pairs
	MAXCTMP	Maximum case temperature (cerent15216EdfaCtmpMax).
		thresholdvalue can be between 20 and 70, with default of 65 in
		units of °C.
	MAXCTMPHYST	Maximum case temperature hysteresis
		(cerent15216EdfaCtmpMaxHysteresis).
		thresholdvalue can be between 0 and 10, with default of 1, in
		units of °C.
	MINCTMP	Minimum case temperature (cerent15216EdfaCtmpMin).
		thresholdvalue can be between –10 and 10, with default of –5,
		in units of °C.
	MINCTMPHYST	Minimum case temperature hysteresis
		(cerent15216EdfaCtmpMinHysteresis).
		thresholdvalue can be between 0 and 10, with default of 1, in
		units of °C.

Cisco ONS 15216 EDFA2 Operations Guide

9-58 78-16033-01