Cisco Systems 15216 EDFA2 manual Ed-Dwdm, CommandED-DWDM

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

F I N A L D R A F T - C I S C O C O N F I D E N T I A L

9.7.10 ED-DWDM

CommandED-DWDM

Configures the ONS 15216 EDFA2 optical control parameters.

SyntaxED-DWDM:[<tid>]:<aid>:<ctag>:::[PUMP1CTRLMODE=<pump1ctrlmode>],[PUMP1CTRLVALUE=<pump1ctrlv

alue>],[PUMP2CTRLMODE=<pump2ctrlmode>],[PUMP2CTRLVALUE=<pump2ctrlvalue>],[OVERALLGAIN=<gai

n>],[PREATT=<preatt>];

Example 9-12 ED-DWDM Command

Amp01:ONS15216 EDFA2> ED-DWDM:Amp01:ALL:123:::PUMP1CTRLMODE=GAINTEMP;

Table 9-17 ED-DWDM Syntax Description

Parameter	Syntax	Description
aid	1	1 and ALL have same input effect.
	ALL
pump1ctrlmode,		Pump 1 or pump 2 control mode (maps to
pump2ctrlmode		cerent15216EdfaPumpCfgControlMode for the corresponding
		pump). Generally, pump1ctrlmode and pump2ctrlmode must be
		the same value. One exception is OPWR which is not valid for
		pump 1 and can only be set for pump 2. Possible values are:
	GAINTEMP	Constant Gain Temperature Compensated mode (manufacturer
		default) (cerent15216EdfaPumpCfgControlMode set to
		constGainTempComp). If one pump is set to GAINTEMP, the
		other pump automatically gets set to GAINTEMP also.
	OPWR	Constant Output Power mode
		(cerent15216EdfaPumpCfgControlMode set to
		constOutputPower). This is not a valid mode for pump 1. If
		pump 2 is set to OPWR, pump 1 gets automatically set to PWR
		with a value of 75 mW.
	CRNT	Constant Pump Current mode
		(cerent15216EdfaPumpCfgControlMode set to constCurrent).
		Must set pump 1 and pump 2 to this mode at the same time.
	PWR	Constant Pump Power mode
		(cerent15216EdfaPumpCfgControlMode set to constPower).
		Must set Pump 1 and Pump 2 to this mode at the same time.
	IDLE	Pump is shut down (cerent15216EdfaPumpCfgControlMode
		set to idle).

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01 9-17