Viking InterWorks 56K manual MNP 10 Commands Continued, Initialization Strings, Caller ID Commands

VIKING COMPONENTS 56K USB MODEM USER’S GUIDE

MNP 10 Commands (Continued)

Command	Function
@M0	Select initial transmit level of -26 dBm.
@M1	Select initial transmit level of -30 dBm.
@M2	Select initial transmit level of -10 dBm.
@M3 - @M10	Select initial transmit level of -10 dBm.
@M11	Select initial transmit level of -11 dBm.
@M12	Select initial transmit level of -12 dBm.
@M30	Select initial transmit level of -30 dBm.
:E0	Disable the compromise equalizer.
:E1	Enable the compromise equalizer.
Initialization Strings

Command	Function
+MS=12,1	V.90 preferred (K56flex will still work).
+MS=12,1,34667,56000
	V.90 only (K56flex and V.34 disabled).
+MS=56,1	K56flex preferred (V.90 will still work).
+MS=56,1,34000,56000
	K56flex only (V.90 and V.34 disabled).
+MS=11,1	Disable V.90 and K56flex, use V.34 (28.8/33.6).
Caller ID Commands

Command	Function
#CID=0	Disable Caller ID.
#CID=1	Enable Caller ID with formatted presentation.
#CID=2	Enable Caller ID with unformatted presentation.

27Chapter 6