VIKING COMPONENTS 56K USB MODEM USER’S GUIDE
Basic AT Command Set (Continued)
Command | Function |
&G0 | Disable guard tone. |
&G1 | Disable guard tone. |
&G2 | Enable 1800 Hz tone. |
&J0 | Set |
&J1 | Set |
&K0 | Disable DTE/DCE flow control. |
&K3 | Enable RTS/CTS DTE/DCE flow control. |
&K4 | Enable XON/XOFF DTE/DCE flow control. |
&K5 | Enable transparent XON/XOFF flow control. |
&K6 | Enable both RTS/CTS and XON/XOFF flow control. |
&L0 | Select dial up line operation. |
&L1 | Select leased line operation. |
&M0 | Select direct asynchronous mode. |
&M1 | Select sync connect with async |
&M2 | Select sync connect with async |
| directory zero.* |
&M3 | Select sync connect with async |
| act as Talk/Data switch.* |
&P0 | Set 10 pps pulse dial with 39%/61% make/break. |
&P1 | Set 10 pps pulse dial with 33%/67% make/break. |
&P2 | Set 20 pps pulse dial with 39%/61% make/break. |
&P3 | Set 20 pps pulse dial with 33%/67% make/break. |
&Q0 | Select direct asynchronous mode. |
&Q1 | Select sync connect with async |
&Q2 | Select sync connect with async |
| dialing of directory zero.* |
&Q3 | Select sync connect with async |
| act as Talk/Data switch.* |
&Q4 | Select Hayes AutoSync mode. |
&Q5 | Modem negotiates an error corrected link. |
&Q6 | Select asynchronous operation in normal mode. |
&R0 | CTS tracks RTS (async) or acts per V.25 (sync). |
&R1 | CTS is always active. |
&S0 | DSR is always active. |
&S1 | DSR acts per V.25. |
&T0 | Terminate any test in progress. |
*Serial Interface operation only.
