Philips 42TA648BX user manual Connect the power cord

FRANÇAISE ENGLISH

Connect to a Direct Broadcast Satellite (DBS)

There are two main DBS systems: DirecTV and DishNetwork. These systems require a separate, proprietary set-top box to decode signals and send them to the TV. The set-top box contains a digital TV tuner for receiving off-air digital television broadcasts.

Contact your local DBS provider for more information about the connections and the TV channels.

Connect to a set-top box

A cable box or satellite set-top box can be connected to the TV through the following connections:

•ANT

•A/V (Composite Video and Audio)

•S-Video

•YPbPr (Component Video Input)

•HDMI

Connect a set-top box through component video input or

HDMI

R	R	R	SERV. U
L	L	L

SPDIF

OUT

Pr Pr

	Pb	Pb	VIDEO	L
			S-VIDEO
	Y	Y		R
	AV 1	AV 2	AV 3	DVI AUDIO
				IN
HDMI 1	HDMI 2			HDMI 3

ESPAÑOL

For information about how to connect a set-top box, see the Quick Start Guide provided.

Connect a set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 and 4, or the channel specified by the service provider.

3.4Connect the power cord

B WARNING: Verify that your voltage corresponds with the voltage printed at the back of the TV. Do not insert the power cord if the voltage is different.

To connect the power cord

1.Locate the power connector at the back of the TV.

The location of the power connector varies according to TV model.

2.Insert the power cord fully into the TV power connector.

3.Connect the power cord plug to the power outlet. Ensuring that the cord is tightly secured at both ends.

To disconnect the TV from the power outlet

The TV set is always connected to the power.You can disconnect the TV from the power by doing one of the following tasks:

•Unplug the power cord located at the back of the TV.

•Unplug the power cord from the power socket outlet.

Pull the power cord by the plug - do not pull on the power cord.

EN-8