SMC Networks SMC8150L2 manual Show map ip dscp, This command shows the IP Dscp priority map

Priority Commands 4

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•The precedence for priority mapping is IP DSCP, and default switchport priority.

•DSCP priority values are mapped to default Class of Service values according to recommendations in the IEEE 802.1p standard, and then subsequently mapped to the four hardware priority queues.

•This command sets the IP DSCP priority for all interfaces.

Example

The following example shows how to map IP DSCP value 1 to CoS value 0:

Console(config)#interface ethernet 1/5

Console(config-if)#map ip dscp 1 cos 0

Console(config-if)#

show map ip dscp

This command shows the IP DSCP priority map.

Syntax

show map ip dscp [interface]

interface

•ethernet unit/port

-unit - Stack unit. (Always unit 1)

-port - Port number. (Range: 1-26/50)

•port-channel channel-id(Range: 1-32)

Default Setting

None

Command Mode

Privileged Exec

4-191