SMC Networks SMC8150L2 manual Management, IP Filter Commands Function Mode

System Management Commands 4

•password - password for this privilege level.

(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)

Default Setting

•The default is level 15.

•The default password is “super”

Command Mode

Global Configuration

Command Usage

•You cannot set a null password. You will have to enter a password to change the command mode from Normal Exec to Privileged Exec with the enable command (page 4-19).

•The encrypted password is required for compatibility with legacy password settings (i.e., plain text or encrypted) when reading the configuration file during system bootup or when downloading the configuration file from a TFTP server. There is no need for you to manually configure encrypted passwords.

Example

Console(config)#enable password level 15 0 admin

Console(config)#

Related Commands

enable (4-19) authentication enable (4-72)

IP Filter Commands

Table 4-11 IP Filter Commands

Command	Function	Mode	Page
management	Configures IP addresses that are allowed management access	GC	4-27
show management	Displays the switch to be monitored or configured from a	PE	4-28
	browser

management

This command specifies the client IP addresses that are allowed management access to the switch through various protocols. Use the no form to restore the default setting.

Syntax

[no] management {all-client http-client snmp-client telnet-client}start-address[end-address]

•all-client- Adds IP address(es) to the SNMP, web and Telnet groups.

•http-client- Adds IP address(es) to the web group.

•snmp-client- Adds IP address(es) to the SNMP group.

4-27