SMC Networks SMC8150L2 manual Cluster Member Configuration, Web Click Cluster, Configuration

3 Configuring the Switch

Web – Click Cluster, Configuration.

Figure 3-123 Cluster Configuration

CLI – This example first enables clustering on the switch, sets the switch as the cluster Commander, and then configures the cluster IP pool.

Console(config)#cluster	4-238
Console(config)#cluster commander	4-239
Console(config)#cluster ip-pool 10.2.3.4	4-239
Console(config)#

Cluster Member Configuration

Adds Candidate switches to the cluster as Members.

Command Attributes

•Member ID – Specify a Member ID number for the selected Candidate switch. (Range: 1-16)

•MAC Address – Select a discoverd switch MAC address from the Candidate Table, or enter a specific MAC address of a known switch.

3-196