SMC Networks SMC8150L2 manual Enabling Snmp Agent Status, Configuring IP Trap Managers

Simple Network Management Protocol 3

Web – Click SNMP, Configuration. Fill in the IP address and community string for each trap manager that will receive trap messages, and then click Add. Select the trap types required using the check boxes for Authentication and Link-up/down traps, and then click Apply.

Figure 3-25 Configuring IP Trap Managers

CLI – This example adds a trap manager and enables both authentication and link-up, link-down traps.

Console(config)#snmp-server	host 192.168.1.19 private version 2c	4-104
Console(config)#snmp-server	enable traps	4-106

Enabling SNMP Agent Status

Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).

Command Attributes

• SNMP Agent Status – Check the box to enable or disable the SNMP Agent. Web – Click SNMP, Agent Status.

Figure 3-26 Enabling SNMP Agent Status

3-35