SMC Networks SMC8150L2 manual Ip igmp max-groups action, Show ip igmp filter

Multicast Filtering Commands 4

Example

Console(config)#interface ethernet 1/1

Console(config-if)#ip igmp max-group 10

Console(config-if)#

ip igmp max-groups action

This command sets the IGMP throttling action for an interface on the switch.

Syntax

ip igmp max-groups action {replace deny}

•replace - The new multicast group replaces an existing group.

•deny - The new multicast group join report is dropped.

Default Setting

Deny

Command Mode

Interface Configuration

Command Usage

When the maximum number of groups is reached on a port, the switch can take one of two actions; either “deny” or “replace.” If the action is set to deny, any new IGMP join reports will be dropped. If the action is set to replace, the switch randomly removes an existing group and replaces it with the new multicast group.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#ip igmp max-group action replace

Console(config-if)#

show ip igmp filter

This command displays the global and interface settings for IGMP filtering.

Syntax

show ip igmp filter [interface interface]

interface

•ethernet unit/port

--unit - Stack unit. (Range: 1)

--port - Port number. (Range: 1-29)

•port-channel channel-id (Range: 1-32)

Default Setting

None

4-215