SMC Networks SMC8150L2 manual Main Menu Description, System System Information

3 Configuring the Switch

Main Menu

Using the onboard web agent, you can define system parameters, manage and control the switch, and all its ports, or monitor network conditions. The following table briefly describes the selections available from this program.

Table 3-2 Main Menu

Menu	Description	Page
System		3-10
System Information	Provides basic system description, including contact information	3-10
Switch Information	Shows the number of ports, hardware/firmware version	3-11
	numbers, and power status
Bridge Extension	Shows the bridge extension parameters	3-13
Configuration
IP Configuration	Sets the IP address for management access	3-14
Jumbo Frames	Enables jumbo frame packets.	3-17
File Management		3-17
Copy Operation	Allows the transfer and copying files	3-17
Delete	Allows deletion of files from the flash memory	3-18
Set Start-Up	Sets the startup file	3-18
Line		3-21
Console	Sets console port connection parameters	3-21
Telnet	Sets Telnet connection parameters	3-23
Log		3-25
Logs	Stores and displays error messages	3-25
System Logs	Sends error messages to a logging process	3-26
Remote Logs	Configures the logging of messages to a remote logging process	3-27
SMTP	Sends an SMTP client message to a participating server.	3-28
Renumbering	Renumbers the units in the stack	3-30
Reset	Restarts the switch	3-30
SNTP		3-31
Configuration	Configures SNTP client settings, including broadcast mode or a	3-31
	specified list of servers
Clock Time Zone	Sets the local time zone for the system clock	3-32
SNMP		3-33
Configuration	Configures community strings and related trap functions	3-33
Agent Status	Enables or disables SNMP Agent Status	3-35
SNMPv3		3-36

3-4