SMC Networks SMC8150L2 manual Service-policy, Syntax Show class-map class-map-name

Quality of Service Commands 4

service-policy

This command applies a policy map defined by the policy-mapcommand to the ingress queue of a particular interface. Use the no form to remove the policy map from this interface.

Syntax

[no] service-policy input policy-map-name

•input - Apply to the input traffic.

•policy-map-name- Name of the policy map for this interface. (Range: 1-16 characters)

Default Setting

No policy map is attached to an interface.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

•You can only assign one policy map to an interface.

•You must first define a class map, then define a policy map, and finally use the service-policycommand to bind the policy map to the required interface.

Example

This example applies a service policy to an ingress interface.

Console(config)#interface ethernet 1/1

Console(config-if)#service-policy input rd_policy

Console(config-if)#

show class-map

This command displays the QoS class maps which define matching criteria used for classifying traffic.

Syntax

show class-map [class-map-name]

class-map-name- Name of the class map. (Range: 1-16 characters)

Default Setting

Displays all class maps.

Command Mode

Privileged Exec

4-199