SMC Networks SMC8150L2 manual Configuring Event Logging, Displaying Log Messages

Basic Configuration 3

CLI – Enter Line Configuration mode for a virtual terminal, then specify the connection parameters as required. To display the current virtual terminal settings, use the show line command from the Normal Exec level.

Console(config)#line vty		4-11
Console(config-line)#login local		4-11
Console(config-line)#password 0 secret		4-12
Console(config-line)#timeout login response 300		4-13
Console(config-line)#exec-timeout 600		4-13
Console(config-line)#password-thresh 3		4-14
Console(config-line)#end
Console#show line		4-18
Console configuration:	3 times
Password threshold:
Interactive timeout:	Disabled
Login timeout:	Disabled
Silent time:	Disabled
Baudrate:	9600
Databits:	8
Parity:	none
Stopbits:	1
VTY configuration:	3 times
Password threshold:
Interactive timeout:	600 sec

Login timeout: 300 sec

Console#

Configuring Event Logging

The switch allows you to control the logging of error messages, including the type of events that are recorded in switch memory, logging to a remote System Log (syslog) server, and displays a list of recent event messages.

Displaying Log Messages

The Logs page allows you to scroll through the logged system and event messages. The switch can store up to 2048 log entries in temporary random access memory (RAM; i.e., memory flushed on power reset) and up to 4096 entries in permanent flash memory.

Web – Click System, Log, Logs.

Figure 3-16 Displaying Logs

3-25