152CHAPTER 16: MULTICAST CONFIGURATION GUIDE

MAC group address:0100-5e01-0101

Host port(s):Ethernet1/0/19

#View the multicast group information that contains port information on Switch B.

<SwitchB> display mpm group Total 1 IP Group(s). Total 1 MAC Group(s).

Vlan(id):200.

Total 1 IP Group(s).

Total 1 MAC Group(s).

Router port(s):

IP group(s):the following ip group(s) match to one mac group.

IP group address:225.1.1.1

Host port(s):Ethernet1/0/24

MAC group(s):

MAC group address:0100-5e01-0101

Host port(s):Ethernet1/0/24

Vlan(id):103.

Total 0 IP Group(s).

Total 0 MAC Group(s).

Router port(s):Ethernet1/0/10

As shown above, Host A and Host C can receive multicast data.

Configuring simulated joining

Configure simulated joining on Switch B, thus to prevent the multicast switch from considering that no multicast receiver exists on the subnet due to some reasons and pruning the corresponding path from the multicast forwarding tree.

# Configure Ethernet 1/0/21 as a simulated host to join multicast group 225.1.1.1.

<SwitchB> system-view

[SwitchB] interface Vlan-interface 200

[SwitchB-Vlan-interface200] igmp host-join 225.1.1.1 port Ethernet 1/0/21

#View the multicast group information that contains port information on Switch B.

<SwitchB> display mpm group Total 1 IP Group(s). Total 1 MAC Group(s).

Vlan(id):200.

Total 1 IP Group(s).

Total 1 MAC Group(s).

Router port(s):

IP group(s):the following ip group(s) match to one mac group.

IP group address:225.1.1.1

 

Host port(s):Ethernet1/0/21

Ethernet1/0/24

MAC group(s):

 

MAC group address:0100-5e01-0101

 

Host port(s):Ethernet1/0/21

Ethernet1/0/24

Page 152
Image 152
3Com 5500G, 4210, 4200G manual As shown above, Host a and Host C can receive multicast data, Configuring simulated joining