XRN Fabric Configuration 245
Otherwise, you cannot enable the fabric port. For detailed restrictions, refer to the error information output by devices.
■When configuring XRN, do not configure other functions, and before configuring other functions, make sure the fabric has been established and works normally.
■After a fabric is established, do not remove or plug in the cables used to form the fabric or shut down/bring up a fabric port, do not modify the unit ID of the device, and keep stability of the links between fabric ports to avoid fabric split.
■In an XRN fabric, it is required to keep the global configurations on all the fabric members consistent. If the global configurations on a switch are different from those on other switches, XRN will restart the switch forcibly and generate the same global configurations for the switch. Therefore, before building an XRN fabric, make sure the global configurations on all the switches are the same, and backup the existing configurations as needed to avoid configuration loss in case of switch restart.
■Do not modify the global configurations of any member switch when an XRN fabric is being built or the topology is unstable, so as to avoid switch restart due to global configuration inconsistency of member switches.
■If a Switch 5500G with
